Articles

With over 60-years combined Schramm experience, the East Coast Service Center is prepared to service and find parts for Schramm rigs.

Geoprobe® Kansas Service Center saves customers time and money with factory refurbishment.

New Geoprobe® North Carolina Service Center makes getting quality service and maintenance even easier.

Geoprobe® Southeast Service Center technicians repair engine and hydraulic pump on CME45.

Geoprobe® tooling saves money in the long run due to consistent quality and a dedication to R&D.

4.25 HSA Continuous Sampler saves time and wear on equipment, keeps worksites cleaner, and takes strain off of drillers.

The power of the GH63 hammer on the 6011DT was put to the test in an indoor, low-clearance site.

6712DT's size and power is perfect for not only soil sampling and landfill gas collection but also monitoring well installation.

Pairing the 6712DT with the 20CPT Press makes a system that is faster, safer, and more efficient.

Strength of Geoprobe® manufactured ASTRA CPT cone withstands difficult geologies at an attractive price point.

Direct Image® Tooling provides high-quality data in the unforgiving geology of Alaska.

Multifunctional 3230DT provides power for additional depth with ability to quickly switch between drilling methods to achieve efficient completion of mining sector projects.

3145GT on crawler carrier accesses remote sites while towing additional supplies and possessing capability to perform direct push, coring, and SPT.

3100GT with direct push capabilities provides more accurate assessments during mine exploration.

3100GT features including easy maintenance, an extendable mast, and no deck engine simplify fieldwork.

The Geoprobe® 3135GT Geotech Rig checks all the boxes with 10,000 ft-lb true torque, 1,000 rpm, 48,000 lbs pullback and more.

With 10,000 ft lbs of torque and 1,000 rpm, a customer describes the Geoprobe® 3135GT as “one of the fastest five stroke rigs they’ve run.”

3126GT versatility satisfies clients seeking multiple sampling methods, all with a single rig, while smaller footprint simplifies mobilization.

Decked out 7822DT performs drilling on a mission critical project in Oklahoma.

Doubling down on two new 7822DTs to meet demand of local construction and area growth. The compact rig easily maneuvers on small sites with power, versatility, and durability for environmental or geotechnical sampling.

7822DT sets 4.25 hollow stem augers off the end of a dock on Mackinac Island. They performed mud rotary out the end and pulled the rods before taking a split spoon sample.

Newer versions of the 7822DT increase operational efficiency with updated technology and features.

7822DT versatility enables effective environmental and geotechnical sampling with a single machine.

DM250 slips into small sites with ability to level up using outriggers behind cab.

DM650 Air provides time-saving features like backloading carousel and top head side shift.

DM250 small size and big power provides solutions to tight urban geothermal sites in the Los Angeles area.

DM450 equipped with twin centrifugal pumps offers impressive performance for diversified drilling sites.

Simple operation of 8150LS utilizing rod rack and rod handler to maneuver rods makes for efficient production.

The power, support, and operator ease and efficiency are the factors that set the Geoprobe® Sonic System apart.

The Geoprobe® GV5 sonic head provides not only production power but also longevity.

The 8150LS makes way for easier and quieter drilling with greater capability and efficiency.

The 7822DT provides perfect power to size ratio to complete mineral exploration drilling on Maryland mine.

Want to keep all your rig information stored in one easy-to-access location? With our NEW redesigned customer portal, Centerpoint Connected, you get access to your order and machine records, can keep track of maintenance, and more. 

Nobody likes to think about the day a rig breaks down. But when it does, having experienced service technicians just a phone call away and a network of service centers is vital to getting back in the field as soon as possible.

When work slows down in an industry, diversifying into a new one helps keep a steady flow of work orders and increase revenue. With a 7822DT, it does not need to mean investing in a new rig, but instead investing in some additional tooling.

Engineered with geotechnical industry in mind, this versatile rig is powered by a 134HP Cat C3.6 engine and comes ready to integrate Measurement While Drilling (MWD) capabilities. More rotary speed, more torque – all on a compact rig.

ASTRA CPT cone provides the service advantage of in-country support and added strength at the neck to survive tough soil conditions.

Beyond physical rig components, the ability to access extensive support services ensures you get the most out of your equipment. This can include remote diagnostics, expert service support, and class-leading warranties.

Read which sonic drill rig features companies find valuable in providing faster, easier, safer production, including hands-free rod handling systems and rod carriers considered “game changers” for their enhanced safety and reduced physical strain.

Enhanced safety and reduced physical strain placed on your team proves invaluable when weighing cost of investing in a sonic rig system.

When evaluating sonic drill rig options, keep an eye toward simplifying your fieldwork. Look for features to safely succeed in even the most challenging drilling scenarios while maintaining reliable production and minimizing operation costs.

Beyond physical rig components, evaluate a manufacturer’s ability to offer extensive support services to ensure you get the most out of your equipment.

Manufacturing productive sonic drill rigs requires more than just engineering prowess. Innovations are more effective when those skilled engineers are also experienced in operating the sonic rig themselves.

In a wide range of formations, a single sonic drilling rig can quickly provide continuous, undisturbed core samples to impressive depths while preserving the option for setting wells - often at less cost per foot.

After suspending in-house drilling around 2009, Nutrien — the world's largest fertilizer producer — brought it back after investing in a DM250 in 2023.

Customers are excited about our fourth service center in Hickory, North Carolina, which opened July 8 and is located at the halfway point between our Ocala, Florida, and Oxford, Pennsylvania, service centers.

For job sites that require clean and precise core samples, the NEW 4.25 HSA Continuous Sampler is designed to capture higher-quality samples while reducing strain on the drillers.

When your rig is out of commission, it’s important to get the support and replacement parts you need as quickly as possible. But when your rig specialist is in another country, it’s not just speed that matters – it’s also product knowledge.

With a new class-leading three-year warranty on the GV5 sonic head, a stronger breakout, and more; the 8150LS sonic drill rig is now more robust and reliable than ever before.

When looking to further diversify its rig fleet by adding sonic technology, McMillan Drilling – a family-based company in New Zealand – opted for Geoprobe®. Today they own three sonic rigs – all Geoprobe®, with the 8150LS added during 2023.

Geoprobe® Engineers spend time building in the shop and testing in the field to create quality machines for customers.

DM250 squeezes into tight urban job sites without leaving a trace of its presence.

East Coast Service Center technicians perform routine rig maintenance to keep rigs running smoothly.

Investment in a new DM450 paid for itself through increased productivity.

Production efficiency of DM650 air drilling rigs combined with industry-leading manufacturer's service support provides solid solution for geothermal energy projects.

Adding a DM450 to the fleet aids maneuverability and doubles capabilities.

NMR works by using an induced magnetic field to affect and align the nucleus of the hydrogen atoms within water molecules.

Geoprobe® machines feature safe, intuitive, and user-friendly controls for a fast learning curve for operators as well as drop racks and storage options for convenient tooling access.

Geoprobe® engineered and manufactured with industry-compatible threads, our NEW 3.5 Sonic Rod is lighter weight, especially important when site conditions require manually handling rod.

The new 4x6 Stack Rack designed for 4X6 tooling systems, includes a lower storage area for 6-inch sonic casing and an upper storage are for either 3.5 or 4.5 sonic rods.

Enhancing safety on sonic job sites just got simpler with the self-propelled SRC30DT rod carrier. When paired with 8150LS and rod handler, achieve virtually hands-free tooling operation.

There are many advantages with the Geoprobe® Sonic Drilling System including training, service, peace of mind, ease, mobility, safety, efficiency, and options.

The East Coast Service Team works hard to keep companies like Odyssey Environmental Services in the field as much as possible.

Geo Drill Inc appreciates how knowledgeable the Geoprobe® Service Team is and their ability to help solve problems quickly.

Regular maintenance and assistance from international service team keeps rigs running smoothly for our international customers.

OIP-UVR provides added confidence when detecting lighter-end jet fuels.

Geoprobe® manufactures high quality tooling by listening to customer feedback and continuing to innovate.

The small footprint of the 6011DT slides into tight indoor spaces for site investigations.

The new electric actuator expedites projects, eliminating doing sampling by hand.

7822DT provides perfect power to size ratio to complete geological exploration of a Maryland mine.

Combination of 7822DT, 6620DT, and 6610DT provides perfect fleet to do site investigations involving hazardous material contamination and remediation.

Multifunctional capabilities of 7822DT make it the ideal choice for crane deployment.

Companies opt for the DT325 SPT OTE method for its worker safety, consistency, speed of drilling, and lack of soil disposal.

The new 4.25 HSA continuous sampler system has improved their ability to pack a solid soil core.

Driller praises the power and smoothness of the 3230DT when coring rock.

Torque, down force, and pulling force of 3230DT chews through tough soil conditions with added safety compared to conventional rigs.

The DM450, in many ways, mirrors the DM250, but the larger rig aids maneuverability on challenging sites.

Customers can trust in Geoprobe® quality because of the years of research and development that go into each machine before being sold.

8150LS V3 includes new unmatched 3-year/1,000 hour GV5 head warranty, beefed up breakout to handle range of tooling diameters, and adjustable height control panel.

ASTRA CPT cone manufactured by Geoprobe® provides strength to tackle tough subsurface conditions.

Owning 20CPT Press on skid steer increases drillers' ability to take on more technical exploration projects and makes their in situ investigations easier.

Geoprobe® Engineers listen to customer feedback to innovate and improve machines like the 20CPT Press.

The ability to mobilize tools on drop rack and efficiently set up for boring positioned 3126GT for success on project requiring crane lift over wall.

Drillers impressed with efficiency, speed, and ease of use with Geoprobe® patented interlocking split spoon samplers.

MWD takes advantage of data already available from the rig and makes it useable in other software or logging hardware for operators looking to utilize that data.

3100GT offers comfortable truck chassis with added efficiency of 31series centerline head side shift mast, including intrinsic safety features.

C24 Concept Rig supplies drillers with favorite rig features like centerline head side shift plus additional power.

We are excited to announce that this summer we are opening our fourth service center in Hickory, North Carolina.

Expertise of East Coast Service Center technicans to provide common repairs, like top head rebuilds, keeps rigs of any make or model running smoothly.

The DM450 options help save time and money by increasing productivity.

The DM450 increases efficiency and saves time for Cathodic Protection drilling.

Taking rigs in for regular maintenance can help them last longer in the field and prevent problems when you need them most.

Geoprobe® Service Centers helped tip the scale when deciding on rig manufacturers.

Adding DM450 to fleet doubles customer service offerings.

Save money and time by choosing Geoprobe® Drill Pipes which are heavy-duty and lighter than conventionaldrill pipes.

The DM250 does not require a CDL which allows for more drillers to learn and operate it.

The DM250 stands out because it is user-friendly, quiet, and reliable.

The DM250 can easily maneuver between job sites and through tough terrain.

The performance and controls of the DM250 make it easy to use for newer drillers.

The impressive speed and size of the DM250 make drilling in tighter spaces more efficient and easier.

Geoprobe® Engineers create quality machines by building the equipment and testing it themselves in the field.

Drillers took a risk on the new DM650 Air and were pleased with its efficiency and performance.

When it comes to water well drilling, a small rig doesn’t require sacrificing production. With today’s technology, small drill rigs provide just as much power – or more – than many larger rigs and offer additional business advantages.

Drawn to the DM450 for its simplicity, Wyoming company discovers numerous other business benefits.

Wide array of standardized drilling rig components tailors DM450 to commercial water well, geothermal, or cathodic protection jobs.

New DM250 options include on-board grout mixer to make jobs easier.

Demand for geothermal energy has generated drilling industry growth. For many companies, geothermal drilling business is booming, while others weather fluctuations by diversifying their service lines with a single rig.

Drillers have taken notice of thoughtfully engineered solutions on the latest DM450.

Choose from a wide range of options, including rod carousel, tailoring your DM250 to your geography and production needs.

Attending the Geoprobe® Open House paints a clear picture of how they make metal into machines focused on solving drillers concerns.

Engineers with open ears and service technicians eager to resolve problems equals added value for drillers running the Geoprobe® DM series of water well rigs.

Planted on the plains of Kansas by a bunch of farm boys focused on making drilling equipment, Geoprobe® has blossomed into a world leader in the drilling industry due to strong in-house engineering and exceptional in-house service.

Job sites requiring multiple sizes of rods historically forced drillers to tote the weight — and expense — of multiple sizes of rod grip pullers. Now there's one tool to cover the scope of several other individual tools. Consider the NEW adjustable rod gr

Serving Southeast Alaska with environmental and geotechnical drilling for the past seven years, Cuff Blakely and his wife have progressed their company CLEARVIEW from a Geoprobe® 8M to a 66DT.

Providing Florida with geotechnical and environmental drilling, materials testing, remediation system installation and maintenance, and ground penetrating radar services, the 44-year-old IMPERIAL TESTING & ENGINEERING relies on the Southeast Service

Starting out in Mississippi in the '90s with a couple auger rigs, the WALKER HILL ENVIRONMENTAL INC fleet now includes 27 Geoprobe® rigs — ranging from 7822DT combination drill rigs to 8150LS sonic drilling rigs — across their offices in four different st

With six offices across four states — Kentucky, Illinois, Tennessee, and Connecticut, CHASE ENVIRONMENTAL GROUP INC provides primarily environmental field services and remediation. They increasingly subcontract drilling services for other companies out of

Nuclear Magnetic Resonance (NMR), a widely used borehole wireline logging technology in the petroleum industry for characterizing hydrocarbon reservoirs, has been adapted for hydrological investigations within monitoring wells and open boreholes. During t

Progressing up the ladder from consultant to senior project manager, David Heicher found himself spending more time managing people and budgets and less time in the field. “I’d been in the business 12 years and had a young family so felt stuck,” Heicher

Did you know the first Geoprobe® machines and tools were designed specifically for soil gas sampling? Our capabilities in soil and groundwater sampling were follow-up developments to our initial soil gas sampling systems.

Focused on vapor intrusion, H&P MOBILE GEOCHEMISTRY is one of few companies in their region of California to offer a one-stop-shop for completing vapor probe installation, soil gas sampling, and analyses.

Primarily roaming within a 100-mile radius of Philadelphia, TRISTATE ENVIRONMENTAL MANAGEMENT SERVICES performs a broad range of environmental field services in New Jersey and Southeast Pennsylvania. Project Manager Ted Sobieski credits their “jack-of-all

Geoprobe® engineers are expected to get dirty — in the shops building equipment or in the field testing the latest innovations. This helps customers because they can actually talk to the people who build their machines, they know how to run them, and they

In the environmental drilling industry for two decades, Scott Densteadt has seen it come full circle. “When I started, all we did was drill hollow stem auger or mud rotary. Then direct push side of things really took off and became the standard. However,

GEOTEK ALASKA began with a 54DT and environmental drilling as their bread and butter. Through the years the Alaska company has diversified by opening a second location — in Hawaii — and completing a 50/50 mix of environmental and geotechnical drilling. As

As a project engineer with a Ph.D., Aaron Crowley desired to own his own company. So in May 2022 he partnered with Julie Oliphant, owner of Athena Engineering and Environmental, to launch a sister company ATHENA DRILLING to complete a range of geotechnica

For some air rotary drilling is a rarity, but for EICHELBERGERS INC in Pennsylvania it’s a weekly occurrence using their 7822DTs. They’ve completed air rotary to 220 feet; they’ve drilled using 8-inch and 10-inch casing. On one project they set 10-inch ca

Toting tooling just became simpler with the NEW ‘easy transport drop rack’, providing gates on the ends to keep rods from sliding out and the ability to use the rig blade to pick it up from either side. Other advantages of this NEW Geoprobe® tooling offe

Starting his drilling industry career as a consultant, David Draybuck discovered he didn’t love writing reports. So in 2011, he and his partner gathered funds from closed 401(k)s and an SBA loan to buy a piece of used equipment and launch ENVIROTECH DRILL

Established in 2017 to provide drilling services to geotechnical engineers — focusing on mud rotary technology, PG ENVIRONMENTAL SERVICES struggled to break into the environmental market.

Initially seeing drilling as a route toward a career in consulting, Kyle Brown discovered he liked drilling more than engineering. So, when the industry in Alberta, Canada, slowed down during 2015 he saw it as the perfect opportunity to launch his own bus

Landing a barge project, ODYSSEY ENVIRONMENTAL SERVICES Owner and Project Manager Jason Miller knew he needed to run tooling beyond the capabilities of his fleet of three 7822DTs. The predominantly environmental and geotechnical drilling company in Pennsy

We’re now your source for 10cm2 or 15cm2 cones (probes) for your cone penetration testing (CPT) projects. Pushing a larger diameter cone can provide advantages, depending on the soils you are pushing in.

Passionate about delivering exceptional geotechnical, environmental, and instrumentation exploration services, the TERRACON CONSULTANTS INC office in Savannah, Georgia, went from being without in-house drilling resources in 2021 to running three Geoprobe®

With more than 25 years of experience, Geoprobe® has the technical team and equipment to support your CPT endeavors. “Cory and Troy have made efforts to be at our disposal to ask questions and their response time is exceptional,” said Derek Wolfe, engine

Engineers who had gained valuable geotechnical experience working for the US Army Corps of Engineers Vicksburg District and the Waterways Experiment Station in Vicksburg, Mississippi, launched BURNS COOLEY DENNIS in 1985. Now with a staff of more than 60,

Established in 2004 as a strictly environmental services company, DIRECT PUSH SERVICES has expanded from a couple of rigs and two employees to six rigs and 15 employees. During the past five years, the Utah company has realized this expansion through the

Since launching G2 CONSULTING GROUP in 1994, the Michigan company has outsourced drilling for its geotechnical and environmental consulting and materials testing services. However, during the past few years, drillers they’d been using began discontinuing

Whether a veteran driller or just starting out, a factory visit provides valuable insight when making the investment required to purchase a new rig. Taking time to see firsthand how the rig you’re considering is engineered and manufactured and meeting the

Getting their start in 1992 doing mostly environmental work at gas stations, SHEPLER WELL DRILLING does 75 percent environmental and 25 percent residential work. Lately a lot of their work involves production wells and recovery wells in oil fields.

Having owned J&J WATER WELL & WINDMILL SERVICES since 2013, Robbie Barnard implemented drilling services in 2020.

Four decades ago Michael Barlow began installing pumps and drilling wells with one rig. He diversified into commercial geothermal projects in the early '90s. Today MICHAEL BARLOW DRILLING & SERVICE INC. completes as much service volume as drilling. This i

Engineered to withstand the bigger, deeper work performed by the NEW DM650, the NEW 4.5-inch OD DRILLMAX® drill pipe incorporates a high-strength, lightweight mid-tube between heat-treated, alloy steel ends. Wrench flats are extended to 6 inches for heavy

Leveraging experience in the geotechnical market developing spring assisted swivel lift caps to maintain winch line tension, tooling design engineers brought similar technology to the water well drilling industry with the spring assisted swivel hoist plug

Optional on-board hydraulic welder speeds production and eliminates bigger support truck.

Running one legacy model DM450, family-owned DICK JOYCE WELL DRILLING found themselves looking for a solution to their lengthening list of work.

CREATE OPPORTUNITY TO TASK HELPER WITH OTHER SITE CHORES WHEN YOU CHOOSE CAROUSEL OPTION.

In business providing mainly residential and commercial water well drilling and pump service in Florida since 1997, AFFORDABLE WELL DRILLING & SERVICE INC has experienced significant growth the past five years.

A third-generation company begun by her grandfather Andy Kuka 60 years ago, Danielle Gambrel took over from her father Vince Kuka when he became ill. Completing residential wells and service in Florida as SPRING HILL WELL DRILLING for the last 45 years, t

As ASSOCIATED DRILLING adapts to new ownership, they’re also adapting to the smaller DM250. Calvin Piper now oversees technical work — pumps, water lines, out of water calls — while Kyler Erickson oversees drilling. This includes drilling for water well,

CHOOSE DEPENDABLE, EFFICIENT CAROUSEL OPTION TO SAFELY HANDLE DRILL PIPE AND SPEED OVERALL PRODUCTION.

Drilling since age 18, Paul Tyson decided to return to the industry when he and wife Michelle met and started their own water well installation and geotechnical drilling company in Florida.

Drillers across the country using the DM250 for their water well and geothermal work have been fueling our engineers with ideas and suggestions for improvements. In ongoing efforts to make drilling faster, easier, and safer the newest model DM250 on Ford

Growing up in a drilling family, Kyle Neuendorff began working for the family full-time at the age of 13, learning firsthand lessons on the inefficiencies associated with older equipment. So when he and his brother-in-law established TEXAS SOUTHERN DRILLI

Possessing power to reach depth with ability to support weight of steel casing, the DRILLMAX® DM650 is engineered to handle 24-inch wells. Top head and drill mast features contributing to its ability to quietly and smoothly drill deeper, bigger holes incl

Drillers seeking rotary drilling options for larger, deeper wells in tough geologies choose the DRILLMAX® DM650 offering power of 28.5-foot stroke, 40,000 lb pullback, and 8,000 ft-lb torque. Backed by industry-leading service support, the rig offers addi

Growth east of home base in Burnet, Texas, has Robbie Barnard owner of J&J Water Well & Windmill Services increasingly concerned whether he's equipped for success drilling the necessary 1,000-foot deep wells.

Having had success with an older 7822DT v2, GSG Consultants Inc looked at a new model to provide them the flexibility they desired for their growing workload.

Tri State Drilling LLC operates 10 rigs on a daily basis providing environmental, geotechnical, and mineral exploration drilling services for engineering firms across the southeast from their offices in Chattanooga and Nashville, Tennessee. Four of their

Collecting soil samples using DT22 expedites process with less strain on driller and helper.

Drilling tool quality, - like new AWJ rods - knowledge, and service makes Team Geoprobe® another member of the drill crew.

Tracking shipping information and machine service histories simplified using self service customer portal Centerpoint Connected.

Choosing a rig refurbishment makes sense while also finding source to service rigs and provide parts for long-term business relationship.

Stellar rig repair service considered part of the package price when purchasing Geoprobe® rigs.

Southeast Service Center drill repair shop in Florida saves overhead expenses with available parts while also performing rig repair and paint to get them performing and looking like new.

LL MIHPT site characterization report provides valuable data to ensure permeable reactive barrier contains entire contamination plume at reduced cost to initially proposed plan.

International service and support simplifies maintenance while reducing downtime for Canadian company.

Investing in OIHPT optical imaging system distinguishes services from other in region while providing clients a cost effective characterization.

Groundwater sampling methods using screenpoint latching samplers assure sample integrity by isolating the sample zone.

Scope of PFAS water testing project balloons while successfully using screenpoint sampling under 7822DT and 6712DT.

Cost compared with durability along with product knowledge makes Geoprobe® sonic system - drill rig, tooling, service, and support - worth the investment.

Geoprobe® 8150LS sonic drill rigs featuring rod handling system, dual breakout clamps, and indexing rack makes for easy operation along with tooling advice and support from team of sonic drill rigs experts.

Noticeable power difference in new 6712DT makes installing 2-inch groundwater monitoring wells to 25 feet feasible versus sending 7822DT.

DT325 standard penetration testing (SPT) out-the-end (OTE) efficiently produces borings with less mess.

7822DT size and power makes it perfect tool to safely hunt for hidden treasure on Beyond Oak Island television show.

Ability to perform different drilling methods makes 7822DT workhorse, switching from direct push sampling to bedrock coring quickly and easily.

Enhancements on newer model 7822DT rigs range from function, to fuel savings, to safety.

3230DT versatility as all engineering-type rig - environmental, geotechnical, and CPT - in a single, relatively compact package has advantage of a second hydraulic circuit for mud pump to serve as efficient mud rotary drill.

Adding 20CPT Skid Steer and CPT equipment provides economical way to gain footing in the CPT market.

Seismic CPT module offers processing and procedural advantages to maximize confidence in field testing.

Conducting split spoon soil sampling in heaving sands simplified using interlocking split spoon.

Capabilities of 3126GT - including serving as a rock coring drill - makes rig ideal for array of geotechnical jobs.

3126GT gets into tighter areas and uses less fuel than a big drill truck while providing drilling technology to easily auger to depth on tough sites.

Strengthening drilling safety protocols across the company included stocking spring assisted swivel lift caps.

Simplified mobility of 3100GT truck mounted drill makes it cost effective to expand footprint and because it doesn't require Class A/B CDL expands employee base capable of driving to sites.

Centerline head side shift on NEW 3145GT aligns all head functions and winches over the bore hole for efficient performance on power line projects.

In addition to providing another service option for Geoprobe® rigs, the team's extensive experience working on and rebuilding water well and air rotary rigs means they're also often sought out by companies across the nation for rig refurbs.

Drillers rely on the Geoprobe®/DRILLMAX® Southeast Service Center for stocking parts of a drill rig for routine rig maintenance or more extensive repairs and service to keep rigs operational.

Drill service backed by engineers earns praise of drillers across the country.

Putting hands on controls and interacting with engineers and services technicians during water well drilling equipment factory tour provides incentive to invest in DRILLMAX® rig.

Spring assisted swivel hoist plug provides cleaner, faster, safer production when drilling to make life a little easier.

Drillers realize decreased production times and rig wear utilizing DRILLMAX® drill pipe.

DRILLMAX® drill pipe for sale in multiple sizes offers increased durability with lighter weight and more flow capacity in certain sizes.

Technology of self-feed rod carousel combined with pulldown power and pump result in faster mud pump well drilling production.

Overall power, available options, small top drive drilling rig size, and bigger jacks on latest DM250 models make slipping into lake lots , leveling up, and drilling through tough formations efficient even during frost laws.

Small DM250 outperforms larger rigs with faster rotation speed and head movement while offering easy operation and maneuverability on residential water well drilling sites.

Purchased for its mud rotary capabilities, the DM250 effectively performs air drilling in palm-sized cobbles using an auxiliary air compressor.

Water well construction and pump service business feels like being on vacation when running new DM450.

DRILLMAX® DM450 provides remarkable power for its compact configuration. NEW rod carousel options accommodate drill pipe preference while it permits performing one-man operation.

NEW Geoprobe® DT22 core catcher attachment liners twice as strong as previous product.

While collecting SPT samples through 2.25-inch hollow stem augers in Triassic silt stone, JD Barker, owner of Quantex in North Carolina, started seeing cutting shoe failures...

Seeking an efficient truck-rig solution for road borings, Duane Reichel, owner of Soils & Engineering Services in Wisconsin, found the solution...

As a startup drilling company in 1984 using a baby blue Volkswagen Rabbit as a support “truck,” Kyle Brown, owner and president, served as the company’s driller...

Coming in at 48-inches wide and sporting a GH63 percussion hammer, the NEW 6011DT debuted during Open House delivered a powerful punch to the direct push drilling industry, convincing customers it can solve their predicaments.

Positioned as the next generation of combination rigs, owners of 3100GT truck mounted rig and 3126GT track mounted rig describe the advantages as new machine options are revealed.

For expertise, specialty tools, and part inventory for rig repair to refurbishment choose from one of three service center options.

Easily trip in and out while the helper focuses on other site tasks, ultimately increasing production rates, when you choose the NEW DM450 options.

Amplify production while allowing driller to focus on making the hole and helper to work on other job site duties with NEW options including rod carousel.

Enjoy one-stop shopping with adapter subs in lengths suited to machine and application available on the shelf.

Bears weight of the rod to make removing drill rods from tool string more efficient and safe.

More than 15% Lighter. More than 15% Stronger. More than 30% More Flow Capacity.

Same day parts shipping on most replacement and critical parts when you call before 2 p.m. local time.

Excerpt from "Refurbishing the Drill Rig" by Mike Price, Water Well Journal

Ability to do same size wells on a smaller truck means getting in and out of tight spots.

Technical support from engineers and efficiency of DM450 means more time with family versus working weekends.

Simplicity of DM250 is a game changer for family-owned business.

Rig theft leads to discovering advantages of DM250 to shorten job times ultimately reaping more profit.

The DM250 package gets the job done, especially in tight spaces, as compared to bigger machines.

Drillers take notice of the attention to detail engineers placed on making their jobs easier.

New DM250 options include on-board grout mixer to make jobs easier.

Latest DM250 impresses legacy owner with improvements - from fit, finish and design - including being faster and stronger than previous models.

Drillers have taken notice of thoughtfully engineered solutions on the latest DM450.

Factory-mounted Mudslayer 250 among new features on DM450 to make work easier.

Our collective team continues to work together to live out our company STATEMENT OF OBJECTIVES that were penned by our founders in 1987.

New service center option at 468 Limestone Rd, Oxford, Pennsylvania, 19363, 610-467-1750.

Repair and Paint service option reduces cost and project time compared to Factory Refurbish, suited for rigs which are mechanically sound but need a coat of paint and a few repairs.

Repair and Paint includes new paint, new wiring harnesses, new slides and hoses, switches, worn valves, and decals replaced. The machine is gone through from top to bottom. 

Centerpoint Connected places information at your fingertips with access to your machine and order records.

Consistent, high-quality AWJ rods feature blunt start thread aligning threads and preventing cross threading.

Direct push drilling (percussion hammer driven) machines and tools were introduced to the market in 1987. This technology totally changed the way environmental site investigations were done. Today, Geoprobe® continues to add innovative products into other

Out-the-end (OTE) SPT has gained favor with drillers and engineers. The ability to collect continuous soil samples more quickly — pushing the casing versus completing traditional geotechnical drive and wash — has created business advantages for companies

Geoprobe® drilling tooling flexibility and various diameters prove vital to environmental investigation success.

Rope thread minimizes rotations required to make a joint while size fits inside 2.25-inch rod often used as a conductor casing.

Power and ability to put in anchors quickly with the 6712DT with 20CPT Press results in more footage.

Leaning on the can-do lessons of his Marine training and the small-company culture he cherished during his first drilling job guides building Veteran Drilling into high resolution site characterization resource for California.

Finkler Ambiental uses their Geoprobe® 6712DT in conjunction with Direct Image® MiHPT and OIP systems at a project site that serves as a storage plant for various fuels with more than 300 monitoring wells.

Groundwater Screen Point Latching Samplers isolate sampler with a secure seal within the zone you're pumping to assure sample integrity.

6712DT provides power for PFAS investigation while Genuine Geoprobe® tooling and service from Southeast Service Center amplifies advantages.

Tight spaces are no match for the 6011DT. Use 5-foot tooling and GH63 hammer while still being sized to slip into small spaces.

Increased payload capacity drill truck offers torque, percussion, and speed while remaining under class A/B CDL

Delivering a protected sampling screen to depth and then "opening" or exposing the screen to the formation, the new SP19 Groundwater Sampler is designed for use with the 1.75 rod system often preferred by high resolution characterization professionals.

Seven reasons why Geoprobe® sonic drilling rigs and tooling set companies up for success.

Customer input helps create stronger sonic core catcher.

Increased sampling and casing times means more footage per day while dependability amplifies accuracy of project bids.

Sonic drill rigs and sonic tooling designed as a comprehensive package to work together includes added safety of rod handler, surging sonic business to include water well installation.

Changes to 3.75 tooling improves fit with standard NWL coring bits.

Geotechnical advantages of 7822DT makes it the rig of choice for 90 percent of work and opens up more areas capable of getting into to work.

Surprising power permits completing wireline rock coring with one-stop-shop 7822DT.

7822DT fits the need to efficiently complete both geotechnical and environmental sampling.

Opening an office in a new city was efficient with the ability of the 3230DT to deploy six or seven different drilling techniques.

Being able to access raw data in real-time in the field with Geoprobe® seismic CPT module eliminates the need to remobilize and revisit a site to collect seismic shear wave data.

Benefits of Geoprobe® Seismic CPT include support by technical experts

When compared to other seismic CPT systems, the Geoprobe® Seismic CPT provides better field performance with option to see arrival of the wave.

Improved mud pans and tooling racks streamline mud rotary job site housekeeping.

With tooling designed for the user while still meeting ASTM standards, geotechnical engineering firm drill crews appreciate the ease and simplicity of two recent tooling innovations - the spring assisted swivel lift cap and the interlocking split spoon.

Increased diversity and ability than a conventional rig, the 3100 series machines decrease time adjusting alignment which means increased time drilling with the power to pull steel out of tight conditions.

Higher torque head, third winch option, and lower transportation height among new options on 3100 series machines.

The extra power combined with ability to shift back and forth between different downhole tools on the 3126GT increased productivity when rock coring to 250 feet through granite/quartzite in Virginia.

Adding versatility of a combination drill rig with both direct push drilling and rotary drilling capabilities can minimize mobilization costs and maximize rig utilization, creating advantages for environmental or geotechnical businesses.

Primarily focused on completing site investigations and writing soil reports to help clients eliminate risk as they build...

Doing a bit of everything in the private and government sectors - including drilling, environmental, geotechnical engineering...

Split spoons the shape of balloons when sampling heaving sands have been eliminated since Alt & Witzig Engineering switched...

The Geoprobe® 20 CPT flexible mast option with quick mount design easily attaches the Geoprobe® 6712DT direct push machine.

Olsson desired an efficient, dedicated machine to run their CPT. In choosing the Geoprobe® 20CPT skid steer, their dedicated machine also provided profit versatility...

Versatility of DM450 effective for production pressures of geothermal drilling and cathodic protection drilling service lines.

Upgrading to a DM250 provides a win-win, faster production and more family quality time.

A refurbished DM250 helped the Moore family end a three-year hiatus on water well drilling, building the business back to the founder's dreams.

Replacing their 2005 DM250 with a brand new model gave Simmons a lot more of what they had and a leg up on the competition.

DM250 provides power for wireline technique sampling of mine tailings while lightweight to maneuver lanes through the Georgia pines.

DM250 speeds up installation of dewatering wells, cutting costs per well, while making driller's experience more pleasant.

Reengineered DM450 provides versatility and less downtime after sinkhole sucks down drill rig.

Establishing a strong foothold in the direct push business, Geo Lab Probing Services got their start in 1996 as a sampling, on-site lab screening company...

NEW pricing on liner cutters means your costs are cut in half for MC/MC5, DT22, DT325 and DT45 liner cutters...

When it came time to gain efficiency in geotechnical drilling, John Clark, project manager at Sage Enviro Tech, sought out Geoprobe® sales representative...

Geoprobe® conducts PFAS tests on groundwater sampling products, results, and recommendations for performing groundwater sampling for PFAS compounds...

With scheduling busy drillers becoming increasingly difficult in the Northeast, affecting their clients, SAGE Environmental recognized the need to control its environmental, remedial injection, and geotechnical drilling services...

Launching Island Geo Drillers in New York five years ago, Joe Dalba and partner Ryan Maletta were ready to take their closed-loop geothermal installation business to the next level...

This past summer when Michael Jordan formed his own company in Vermont he chose a 7822DT and genuine Geoprobe® tooling to build Platform Environmental Drilling and Remediation...

Geoprobe® PVC liners tested nondetect for all 52 PFAS compounds...

Understanding the difficult job you face servicing drill rigs when they are busy performing field work, the service centers – in Kansas and Florida – offer several different options to meet your needs...

Our Ocala, Florida, service team is growing...

Using a Geoprobe® 7822DT with DT22, intact soil samples could be taken in designated depths to help approximately 20 archaeologists from Museum of Copenhagen uncover the city’s environmental history...

In production for more than 12 years, the Geoprobe® 7822DT is a workhorse in many company fleets. If you've had your rig for a few years, it may be showing some signs of age. Three key components on the front of the 7822DT deserve periodic inspection...

Despite sloping terrain, swampy forest, and harsh weather, Dekonta successfully used 7822DT and Direct Image® tools in their investigation of an old sand quarry, which during the communist era served as a landfill for various factory wastes...

A recently delivered DM450 drilling geothermal wells at a university at the base of the Rocky Mountains...

With a 140-foot open hole and casing ready to set, Bush Services noticed the hole starting to cave in. Fortunately the operator abandoned the rig as it started sliding backward — into a sinkhole...

Fulcrum often found themselves dependent on other drilling contractors to complete a fair amount of their work. Frustrated, they began looking for ways to make the 20-year-old company more competitive by doing all drilling operations in-house...

NEW 6712DT leverages the Tier 4 engine to incorporate additional features to make your environmental work easier...

For Penecore Drilling, sticking to what they do best and remaining resilient through recessions – and now COVID-19 – has been made just a little easier because “Geoprobe® always comes out with a lot of different things that help us.” ...

Exploring for several years how sonic drilling might fit SAEDACCO's business model, customer needs and evolving technology convinced them it was time to invest...

Companies who had tried drilling at a site in Guymon, Oklahoma, lost pipe strings in the rough formation. Keyes had faith in his Geoprobe® 8150LS and his driller, Billy Graham, to get the job done...

After 26 years, Greg Johnson leaves a legacy of treating customers with honesty and respect and raising the profile of international customers within the company...

Customers remark how they increasingly see requests for sonic capabilities, making sonic rig ownership necessary to maintain or gain market share. When you choose a Geoprobe® 8150LS sonic rotary rig you gain additional advantages...

After just a few uses of the 2-inch interlocking split spoon, Discovery Drilling in Alaska was convinced they needed the new design in a 3-inch version to satisfy their sample-hungry clients...

Enviroprobe Integrated Solutions in West Virgina has steadily increased its geotechnical work since 2013. As their field of work has changed over time, Fore leverages the 7822DT’s ability to core rock...

When MLA Geotechnical found themselves in need of a truck-mounted drill rig to complete thousands of borings per year in hard clays and limestones, the Geoprobe® 3100GT quickly became their top choice...

With more than 20 years experience, Geoprobe® has the technical team to offer CPT troubleshooting, spare parts, service, and repairs — including cone calibration — along with "CPT-ready" rigs...

Given their service area in the north-central United States, the climate-controlled cabin of the Geoprobe® 2060CPT Crawler provided an advantage MATECO thought their customers would appreciate...

One cold day in late December rush-hour motorists noticed green ooze gushing onto the pavement through a crack in the retaining wall of I-696, north of Detroit...

The need of GeoTek Hawaii to provide a combination of services, in a combination of environments, led them to have a combination of rigs – though the fleet tips toward Geoprobe® combination rigs like the 7822DT...

Now even easier on the forearms and wrists, the NEW Spring Assisted Swivel Lift Caps are lighter weight and feature improved vent holes...

Earth anchoring options on our 3126GT, 3100GT, and 7822DT now include a single, dual flight anchor...

GFA found the perfect combination of precision and power with the Geoprobe® 3230DT along with the added benefit of increasing their productivity through the 3230DT’s direct push capabilities...

To meet the varying requests environmental and geotechnical requests, East Coast Drilling Inc. (ECDI) relies heavily on the Geoprobe® 7822DT...

For a company with an ever-increasing geotechnical workload making a name for itself by drilling in difficult geologies, the Geoprobe® interlocking split spoon turned into a perfect solution to their struggle...

Known for providing precision head feed control and versatility to easily switch between drilling techniques, the NEW Tier 4 3230DT adds horsepower and fuel-saving hydraulic features...

Coming in pre-soaked packs of 10, the new poly filters provide the convenience of ‘one-and-done’ versus the extra effort of determining whether the brass filter has exceeded its viability...

The ability to anchor the 3230DT, achieving greater CPT depths, has led to the development of a new procedure integrating the CPT data into the bridge piling design for Nebraska Department of Transportation...

The NEW 3126GT turns the efficiency of the 7822DT up another notch...

Geo Lab Drilling leverages the power of the 7822DT to stretch their capabilities, penetrating shallow rock in the piedmont of the South...

Reducing time transitioning between functions with the centerline head side shift is just one of the advantages afforded by the NEW 3126GT...

Dream of swiftly sliding from rotary to automatic drop hammer without having to reposition mast or machine? The innovative centerline head side shift is a reality on the NEW 3126GT...

Our NEW Geoprobe® 1.75 in. probe rods are stronger, last longer, and can be used for multiple applications...

Inside you’ll find information on new Geoprobe® products and equipment, machine features, project stories from Geoprobe® customers...

Ample rains the past few years have the United States Army Corps of Engineers out of Omaha, Nebraska, busy from the Mississippi River west conducting geotechnical tests on levies and damns...

Completing geotech work across the state of Texas, MLA Geotechnical was accustomed to using their conventional rigs...

No one wants to be stuck in the stone age, which is what it can feel like trying to squeeze profits out of a clunky conventional drill rig...

Turning augers with the throttle full tilt and then idling down when fine tuning tool strings may be automatically programmed into some driller’s minds...

Frozen. Everything. Everywhere. A common challenge in Alaska where the geology is interesting - to say the least - with glacial till and large cobbles. But the tough terra firma...

Loose soils. Medium dense soils. No matter the soil type, the NEW DT22 Detent Drive Head has solved the challenge of damaged or stranded liners...

Cost-efficient mobilization, safety features and ease of operation have made the 3100GT a valuable rig for training new drillers while providing the operating versatility and comfort desired by experienced drillers.

The perfect rig for 2 to 6-inch shallow water wells.

Known for providing power and versatility, the Geoprobe® 7822DT V3 builds upon this tradition with elevated efficiency and minimized maintenance...

The first Contaminated Site Conference July 2-4, 2019, in Sao Paulo, Brazil, includes two sessions by Geoprobe® Geologist Wes McCall as part of the broad selection

Terracon’s intrusive exploration and sampling methods include hollow stem augering, mud and air rotary, rock coring, and direct push...

Throughout the years Geoprobe® has accumulated feedback on how sonic bits wear during their lifetime. Our tooling engineers took this information..

Customers asked, and Geoprobe® tooling engineers have delivered. The interlocking split spoon everyone has grown to love will soon be available in a 3-inch OD version...

Gregg Drilling LLC of Signal, California, spent time indoors this winter. But that doesn’t necessarily mean they were staying warm...

Almost immediately after my return to Geoprobe® I was tossed the keys to our demo 3100GT and told to “go run it."

For more than 20 years DRILLMAX® has been providing drillers with the model DM450 rotary rig. Primarily utilized to complete residential water wells...

Started in 2012 as a geotechnical and materials testing firm, W2 Engineering, Oklahoma City, subcontracted a lot of its drilling...

Using a Geoprobe® 8150LS rotary sonic, GeoTek Alaska drills at -38 degrees Fahrenheit in alluvial sands and gravels of the Tanana Basin near Fairbanks, Alaska...

With a bachelor’s degree in geophysics from the University of California Santa Barbara, Jeff Harra’s interest in mining geology, geologic hazards, and equipment design...

Geoprobe® HPT is becoming one of the most common direct push logging tools used in site characterization. An HPT port is now included on ALL MIP...

While seeing a new machine all shiny and new in a convention center can be impressive, witnessing a machine doing the actual work reveals its true potential...

The goal of Geoprobe® service is to provide the best equipment service support in the drilling industry. Understanding the difficult job our customers...

Control of the winch line tension by the springs in the cap creates natural alignment and prevents binding of threads – making threading and unthreading rods quicker...

One year ago Todd Ewing and his family relocated from Kansas – bringing more than 10 years of Geoprobe® service experience – to open the southeast service shop in Ocala, Florida...

The Interstate Technology and Regulatory Council (ITRC) is a state led coalition working to encourage the use of innovative technology and methods to reduce...

It's now possible to collect SPT data via split spoon sampler and automatic drop hammer within the same 3.75-inch driven casing...

She is the familiar voice you hear when you call the main Geoprobe® number. Whether to order tooling, work through a service challenge...

Rather than continue turning down job requests because they didn’t have a sonic rig, M&W Drilling (MWD) in Knoxville, Tennessee, decided two years ago it was time to get into sonic drilling...

After a couple years working as a consultant alongside drilling companies, Cory Walker gained key insights into what consultants need and a deep understanding of the goals...

With constant pressure to become more cost-efficient, engineers are opting to become more sophisticated in their sampling methods...

To complete primarily environmental, geothermal and cathodic drilling, EWI’s Springfield office started with two Geoprobe® 6620s...

Diversity is a driving force for Atlantic Testing Laboratories Limited (ATL). From diverse office locations to services, ATL has found stability...

With drilling services focused predominantly on infrastructure investigations – roadways and bridges – Environmental and Geotechnical Specialists Inc...

Founded in 2004, RAZEK Environmental LLC in Louisburg, Kansas, operates as a Geoprobe® direct push technology subcontractor...

PFAS compounds have been “emerging contaminants” for a few years now. It seems this last year has reached a critical point for environmental investigation...

In early 2017, we changed some of the components in the HPT Pump and controller. These changes provide better pump performance

Mechanical Bladder Pump Approved by US EPA's ETV Program

So, why is groundwater monitoring important you ask? And what does 'direct push' have to do with it? And for that matter, what is 'direct push'?

Our customers have used the 3.75 in. probe rod and DT37 soil sampling system to collect continuous soil samples and SPT samples for several years...

Our fifth Geoprobe® Open House is in the record books and we couldn’t have asked for a better day full of sunshine and excitement...

The 8150LS sonic drill rig quickly proved itself to GFA International, Inc., while drilling in complex conditions...

When the Geoprobe® Engineering Team released the first 7822DT product in the spring of 2009, we had a good feeling...

The Geoprobe® 4.5 in. heavy duty (HD) sonic drill rods are significantly stronger than their traditional counterpart and manufactured at our facility in Salina, KS...

Geoprobe® continues to engineer machine configurations that allow drilling companies to mobilize to and from projects without the use of a CDL..

The Virginia Institute of Marine Science (VIMS) uses their 66DT to dig up the past – literally – along Virginia’s Eastern Shore barrier islands...

Damasco Penna, a geotechnical engineering company based in São Paulo, Brazil, have been expanding their Geoprobe® fleet since 2008...

On many geotech sites, the need for speed and efficiency is of the utmost importance. Geoprobe® has released two new geotech sampling rigs...

Engineered and built by Geoprobe®, our patented interlocking split spoon saves drillers both time and money...

One of our main company objectives at Geoprobe® is to PROVIDE TOP SERVICE IN THE DRILLING INDUSTRY...

Parratt-Wolff effectively reduced the duration of site remediation for their clients when they introduced MiHpt into their service offerings three years ago...

Geoprobe® has developed an all new drive head for the DT22 Soil Sampling System – making an already efficient system even faster and easier...

In 2017, DRILLMAX® joined Geoprobe®. Bringing companies together is real work, but we are already starting to see new positives emerge...

I’ve been operating the 3230DT since its release and the capabilities continue to impress me...

Shepler Well Drilling, Inc., of Manton, MI, was in the market for an auger rig when they set their sights on the 3230DT...

The Nebraska Department of Transportation found exactly what it was looking for with the 3230DT...

The Optical Imaging Profiler (OIP) is a new direct push photo-logging system developed by Geoprobe® that uses a down hole light source...

The Geoprobe® 2060CPT is a 20-ton-rated, static push Cone Penetration Testing platform that allows users to maximize their efforts...

New Geoprobe® SDT60 Weighted Wire Line System Obtains High-Quality Soil Samples in Less Time

Most MIP (Membrane Interface Probe) work is performed to map...

The Optical Image Profiler (OIP) is a direct push probe that uses UV fluorescence to...

John Fontana, PG and President/CEO of Vista GeoScience in Golden, CO, and his direct sensing team are...

The success of soil investigations and remediation designs is highly dependent o..

2C2, Inc., in Raritan, NJ, was contracted by B

“While anyone in their right mind would...

Since the release of the Hydraulic Profiling Tool (HPT) in 2006...

Wes McCall, PG, Geoprobe® Environmental Geologist, will receive...

After completing 65 borings in...

Summit Drilling provides a wide range of...

The 6622CPT punches way above...

I’m proud to celebrate 20 years as a partner of Enviro-Dynamics...

As a Driller’s Helper, and now a Driller, it didn’t take long for me to become...

Solar grids were constructed in the...

EPhase 2 in Huntington Station, NY, utilized a Geoprobe® 6712DT to install...

Landshark Drilling, located in southern Ontario, Canada, provides...

Holocene Drilling, Inc., servicing the Seattle, WA, and Portland, OR, markets...

A gas station located within the urban core of a major midwestern city was confirmed to...

An artesian effect was causing a problem...

When David Reinsma, now Owner of Trinity Drilling, first attended a Geoprobe® Open House...

The Stearns Drilling 7822DT celebrates its fifth birthday this fall.

Elite Techniques, in Camden, SC, has experienced substantial growth since...

Eichelbergers, Inc., in Mechanicsburg, PA, was approached by...

Since purchasing a Geoprobe® 7822DT, which was originally envisioned to...

Environmental Probing Investigations, in Cream Ridge, NJ, has been...

Dolese Brothers in Oklahoma City, OK, was founded before Oklahoma became...

“The environmental drilling industry is a competitive market...

From rock coring at a ski resort, to performing CPT for liquefaction analysis...

While Geo Lab Drilling near Atlanta, GA, provides an array of services...

Action Environmental in Tampa was approached to see if they had a drill rig large enough to handle proposed environmental work; otherwise sonic options would be pursued...

The success of their first Geoprobe® 8140LS Rotary Sonic rig and associated tooling led McMillan Drilling to...

The 3230DT Combo Rig has seemed to ‘fill the bill’ for Aztech...

Unused since the early 1970s, a 48-in. diameter discharge pipe in a 2-million-gallon industrial wastewater lagoon...

Glacier Drilling, in Durham, CT, designed a “Sonic Drilling Overview and Field Demonstration” course last...

The vision at M&W Drilling, LLC, has been to aggressively expand drilling capabilities to provide a broader range of services to existing clients as well as to attract new ones..

The Force is definitely with EnviroProbe Integrated Solutions, Inc., when it comes to...

In the spring of 2015, Huss Drilling, Dade City, FL, embarked on a large environmental project in...

Jim Nidzgorski, of HD Sonic Drilling in East Palestine, OH, mobilized their Geoprobe® 8140LC Rotary Sonic inside an...

In 2008, when Strongarm Environmental Field Services first purchased their Geoprobe® 6620DT...

Gregg Drilling & Testing, based in California, recently partnered with a Northern California environmental consultant to provide Membrane Interface Probe (MIP) and...

While Geoprobe® sonic machines effectively core rock, sonic does tend to induce fractures in the sample. So if the job calls for accurate...

Never underestimate the capability of the 7822DT! Every day, customers become aware of applications they can offer their clients based on the power...

Are you looking for a limited access, specialty direct push machine? Our 54TR combines the proven 54 Series probe assembly...

Hydraulic Profiling Tool (HPT) Logging is getting a lot of use these days. HPT logs are a good tool for evaluating site stratigraphy...

The timing is right for 7822DTs, 8040DTs, and even some sonic rigs to come in for a refurb or repairs, especially if you continue to run one of the older...

“As far as rig performance goes, I have to say it did very well,” Randy Crandell, Driller for Major Drilling in Salt Lake City, UT, said recently...

Our goal at Active Environmental Technologies, Inc. was to expand the drilling division to provide a much broader range of services to...

We get calls every week, “the engine cranks but will not start or will not run well.” The number one cause is improper fuel system maintenance...

Hynes & Associates, in Salisbury, MD, recently completed another difficult drilling project using a Geoprobe® 7822DT...

During the last 23 years, Tony Poulter, Vice President and Co-Owner of RAZEK in Louisburg, KS, has operated a Geoprobe® machine...

In 2005, Andrew and Tony Armstrong set forward to challenge themselves by starting their own company, Direct Environmental Drilling...

GeoTest Services in San Antonio, TX, completed five limited access interior borings to +/- 20 feet at the University of Houston Cougars...

GeoTek Hawaii was recently retained by Drayko Construction in Honolulu, HI, to complete an innovative project for the City and County...

Last summer Wes McCall and Geoprobe® summer intern Mateus Evald conducted field tests with the Hydraulic Profiling Tool–Groundwater...

Moving things forward. That’s what the sonic weighted wireline tooling from Geoprobe Systems® does. Call it raising the bar...

Geoprobe® 3.75 in. tooling was designed in conjunction with the Geoprobe® 2.0-in. Slim Prepacks to create a more efficient...

Stearns Drilling mobilized their Geoprobe® 8140LS rotary sonic to the former Willow Run Powertrain Plant in Ypsilanti Township in Michigan, the site...

This is one of my favorite accessory tools. It’s simple and effective. This is a true impact-making, gotta-see-it-to-believe-it...

With a few basic movements and one ‘touch’ of the drill stem, sonic tooling can be loaded into the rig’s rod loader, and the machine’s functions take over...

Ever present on the North Campus of Geoprobe Systems® (located on Broadway Blvd) but seldom seen by the public, these men and their ‘machines’ ride...

Dekonta company, a central/eastern European environmental company in Prague, completed both research and commercial activities...

Students and a Professor from the Free University of Brussel (Vrije Universiteit Brussel) used a Geoprobe® Pneumatic Slug Test Kit to perform slug tests inside the Aa...

The Sonic Double Wall 4.5-in. (SDW45) tooling system compliments the conventional sonic 4x6 system. It’s a simple and effective tooling system...

The Geoprobe® sonic rig has really done some incredible things” Robert said. “Everywhere we’ve gone it’s really impressed everyone...

Our customers describe our equipment as “Versatile, Innovative, Easy-to-use, and Supported like no other drilling equipment” they own...

One of our most versatile machines just got an efficiency boost! A true dual winch option is now available for the 7822DT...

The Direct Image® Team at Geoprobe Systems® proudly announces the commercial release of their newest Direct Image® logging tool ... the Optical Image Profiler (OIP)...

Vertex Environmental was retained to complete a large in-situ chemical oxidation injection remediation project by the provincial government in northern Ontario, Canada...

The Resource Drilling and Blasting program at Sir Sandford Fleming College welcomed their new 7822DT in January..

Soil build-up behind the HPT screen is easy to troubleshoot by removing the HPT screen. Does the line pressure return to normal, and are you able to pass...

Tony Pressimone, Operations Manager for Environmental Probing Investigations in Cream Ridge, NJ...

The 3230DT and 3200 are TRUE combination machines, which means their utilization rates go up simply because they are well suited for both...

Within weeks of joining the Applied Geotechnical Engineering Consultants (AGEC) drill rig lineup, they tested the limits of the...

Drilling Engineers in Fort Collins, CO, designed a barge, specifically for their Geoprobe® 7822DT to complete a pre-feasibility study...

In order to meet the Canadian military’s potable water needs, ALTECH Drilling and Investigative Services in Cambridge, Ontario...

Get rid of the pipe wrenches and use the Geoprobe® Portable Hydraulic Clamp that can be attached to most 6620DT, 7720DT, 7730DT, 7822DT, and 6712DT machines...

As a young man out of high school, Rob McAllister wasn’t sure what he wanted to do with his life. That’s something a lot of people can relate to.

The 3230DT may be the most versatile machine Geoprobe Systems® has ever designed and manufactured. Find out more about the machine features.

With an inside diameter of 3.0 in., the 3.75 in. Probe Rods have an optimal casing combining ease of use for 2.0-in. Slim Prepack monitoring well installation,

‘It’s amazing how a project can start off so small and turn into something much larger so quickly!’

Aquifer Drilling & Testing, Inc. (ADT) is currently operating between 8-12 crews gathering information to help design bioswales...