Skip to main content

Video: Geoprobe® 6011DT Overview

Small Drill Rig with Big Direct Push Drill Rig Power

Drillers seeking a small footprint, but big direct push drill rig power, choose the 6011DT to efficiently track into tight spots or through tough terrain. The rig features a proven GH63 percussion hammer while still being sized to slip into small spaces. Easily mobilize the lightweight rig to your direct push jobs with confidence to complete sampling.

  • 48-inches wide, 4,800 lb direct push drill rig only platform
  • GH63 percussion hammer, uses 5-foot tooling
  • 44 horsepower engine
  • Optional low clearance cylinder for indoor spaces
  • Rear stabilizer blade works with Geoprobe® drop racks
  • Load-sense hydraulics reduce fuel consumption
  • Affordable price point
  • Suited for Direct Image® logging tools and CPT
  • International configuration with engine for lesser regulated countries
  • Tier 4/Stage V engine available by end of 2021

Features & Options


  • 48-inches wide, 4,800 lb direct push only platform
  • GH63 percussion hammer, uses 5-foot tooling
  • 44 horsepower engine
  • Optional low clearance cylinder for indoor spaces
  • Rear stabilizer blade works with Geoprobe® drop racks
  • Load-sense hydraulics reduce fuel consumption
  • Affordable price point
  • Suited for Direct Image® logging tools and CPT
  • International configuration with engine for lesser regulated countries
  • Tier 4/Stage V engine 

With drill rig service shops in North Carolina, Pennsylvania, Florida, and Kansas, you’ll have service support nearby for your routine maintenance or more in-depth remounting and refurbishment work. Our service technicians are backed by our team of engineers to ensure solutions not bandaids to issues. And our production processes mean your portable drill rig is constructed consistently and tested thoroughly to ensure easier service support.

Features & Options


  • 48-inches wide, 4,800 lb direct push only platform
  • GH63 percussion hammer, uses 5-foot tooling
  • 44 horsepower engine
  • Optional low clearance cylinder for indoor spaces
  • Rear stabilizer blade works with Geoprobe® drop racks
  • Load-sense hydraulics reduce fuel consumption
  • Affordable price point
  • Suited for Direct Image® logging tools and CPT
  • International configuration with engine for lesser regulated countries
  • Tier 4/Stage V engine 

With drill rig service shops in North Carolina, Pennsylvania, Florida, and Kansas, you’ll have service support nearby for your routine maintenance or more in-depth remounting and refurbishment work. Our service technicians are backed by our team of engineers to ensure solutions not bandaids to issues. And our production processes mean your portable drill rig is constructed consistently and tested thoroughly to ensure easier service support.

Tooling & Accessories

DT22 Soil Sampling System

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25- inch outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25-inch OD light-weight center rods and are inserted to the bottom of the outer casing.

SP22 Groundwater Sampler

Video: SP22-ISP Groundwater Sampler

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-inch Lightweight Center Rods or PVC riser.Designed for tough probing conditions, the screen head on the fully retrievable sampler adapts to either a stainless steel or PVC screen.

MC5 Core Sampler Soil Sampling System (LWCR)

Video: MC5 Soil Sampling - Step by Step

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.MC5 Light Weight Center Rod Soil Sampling System. The MC5 1.25-inch Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”Macro-Core® is a registered trademark of Kejr, Inc., Salina, KS.

Explore

Call Us at (785) 825-1842 for an in-person demo.

Request a Quote

Call Us at (785) 825-1842 to request a rig quote.

Schedule a Visit

Call Us at (785) 825-1842 to visit headquarters.

Applications


6011DT great for indoor spaces

Environmental

Tight spaces are no match for the 6011DT. Use 5-foot tooling and GH63 hammer to core through concrete on industrial sites.

6011DT CPT options available

CPT

Addition of a few components makes CPT possible in tight spaces using the 6011DT.

Specs

Specifications are subject to change without notice.

Standard Metric 
 6011DT 6011DT
Overall Dimensions Overall Dimensions 
Width (in)48Width (mm)1219
Length (transport) (in)106Length (transport) (mm)2692
Length (deployed, lateral fully extended) (in)151.5Length (deployed, lateral fully retracted) (mm)3848
Height (normal transport) (in)77Height (normal transport) (mm)1956
Height (deployed; head full up) (in)151Height (deployed; head full up) (mm)3835
Height (deployed; head full up) (ft)12.6Height (deployed; head full up) (m)3.84
Base Unit Weight (lbs)4,800Base Unit Weight (kg)2,177
Ground Speed (mph)3Ground Speed (kph)4.8
Estimated Track Surface Area (in2)1134Estimated Track Surface Area (cm2)7,314
Estimated Ground Pressure (psi)4.2Estimated Ground Pressure (bar)0.29
Drill Mast Positioning Drill Mast Positioning 
Extension (fore and aft) (in)15Extension (fore and aft) (mm)381
Lateral (side to side) (in)6Lateral (side to side) (± degrees)6
Drill Mast Dump (in)30Drill Mast Dump (mm)762
Rear stabilizer travel (in)24Rear outrigger travel (mm)610
Rear stabilizer width (in)48Rear stabilizer width (mm)1219
Rear stabilizer lift (lbs)1250Rear stabilizer lift (kg)567
Drill Mast Specifications Drill Mast Specifications 
Head Travel (in)66Head Travel (mm)1676
Head Travel (ft)5.5Head Travel (m)1.68
Head Crowd Force (lbs) (at cylinder)32,000Head Crowd Force (kN) (at cylinder)142
Head Pull Force (lbs) (at cylinder)43,000Head Pull Force (kN) (at cylinder)191
Head Feed CarriageComp. slidesHead Feed CarriageComp. slides
Prime Mover & Hydraulic Specs Prime Mover & Hydraulic Specs 
EngineKubota V1505 (LRC)EngineKubota V1505 (LRC)
Engine Rated Power (hp)44Engine Rated Power (kW)33
Fuel Capacity (gal)18Fuel Capacity (L)68
Pump typeAxial Piston - Load SensePump typeAxial Piston - Load Sense
Max pressure (psi)3,400Max pressure (bar)234
Max flow (gpm)24Max flow (L/min)91
Direct Push Hammer Direct Push Hammer 
 GH63 GH63
Percussion rate (Hz)32Percussion rate (Hz)32
Hammer Rotation Torque (ft-lb)560Hammer Rotation Torque (N-m)759
Hammer Rotation Speed (rpm)200Hammer Rotation Speed (rpm)200
Options Options 
Side Rod Rack -- DP Side Rod Rack -- DP 
Side Rod Rack -- DI Side Rod Rack -- DI 
CPT Rate control CPT Rate control 
Interlocked Rotation Guard Interlocked Rotation Guard 
Drop Rack Drop Rack 

Specs

Click below to view standard specifications. Specifications are subject to change without notice.

Standard Metric 
 6011DT 6011DT
Overall Dimensions Overall Dimensions 
Width (in)48Width (mm)1219
Length (transport) (in)106Length (transport) (mm)2692
Length (deployed, lateral fully extended) (in)151.5Length (deployed, lateral fully retracted) (mm)3848
Height (normal transport) (in)77Height (normal transport) (mm)1956
Height (deployed; head full up) (in)151Height (deployed; head full up) (mm)3835
Height (deployed; head full up) (ft)12.6Height (deployed; head full up) (m)3.84
Base Unit Weight (lbs)4,800Base Unit Weight (kg)2,177
Ground Speed (mph)3Ground Speed (kph)4.8
Estimated Track Surface Area (in2)1134Estimated Track Surface Area (cm2)7,314
Estimated Ground Pressure (psi)4.2Estimated Ground Pressure (bar)0.29
Drill Mast Positioning Drill Mast Positioning 
Extension (fore and aft) (in)15Extension (fore and aft) (mm)381
Lateral (side to side) (in)6Lateral (side to side) (± degrees)6
Drill Mast Dump (in)30Drill Mast Dump (mm)762
Rear stabilizer travel (in)24Rear outrigger travel (mm)610
Rear stabilizer width (in)48Rear stabilizer width (mm)1219
Rear stabilizer lift (lbs)1250Rear stabilizer lift (kg)567
Drill Mast Specifications Drill Mast Specifications 
Head Travel (in)66Head Travel (mm)1676
Head Travel (ft)5.5Head Travel (m)1.68
Head Crowd Force (lbs) (at cylinder)32,000Head Crowd Force (kN) (at cylinder)142
Head Pull Force (lbs) (at cylinder)43,000Head Pull Force (kN) (at cylinder)191
Head Feed CarriageComp. slidesHead Feed CarriageComp. slides
Prime Mover & Hydraulic Specs Prime Mover & Hydraulic Specs 
EngineKubota V1505 (LRC)EngineKubota V1505 (LRC)
Engine Rated Power (hp)44Engine Rated Power (kW)33
Fuel Capacity (gal)18Fuel Capacity (L)68
Pump typeAxial Piston - Load SensePump typeAxial Piston - Load Sense
Max pressure (psi)3,400Max pressure (bar)234
Max flow (gpm)24Max flow (L/min)91
Direct Push Hammer Direct Push Hammer 
 GH63 GH63
Percussion rate (Hz)32Percussion rate (Hz)32
Hammer Rotation Torque (ft-lb)560Hammer Rotation Torque (N-m)759
Hammer Rotation Speed (rpm)200Hammer Rotation Speed (rpm)200
Options Options 
Side Rod Rack -- DP Side Rod Rack -- DP 
Side Rod Rack -- DI Side Rod Rack -- DI 
CPT Rate control CPT Rate control 
Interlocked Rotation Guard Interlocked Rotation Guard 
Drop Rack Drop Rack 
Helper Side - Unfolded

Helper Side - Unfolded

Operator Side - Folded

Operator Side - Folded

Front - Folded

Front - Folded

Resources

Click on a section below to view information.

The small footprint of the 6011DT slides into tight indoor spaces for site investigations.

ID: 14026 | Date:

Focused on vapor intrusion, H&P MOBILE GEOCHEMISTRY is one of few companies in their region of California to offer a one-stop-shop for completing vapor probe installation, soil gas sampling, and analyses.

ID: 13418 | Date:

Coming in at 48-inches wide and sporting a GH63 percussion hammer, the NEW 6011DT debuted during Open House delivered a powerful punch to the direct push drilling industry, convincing customers it can solve their predicaments.

ID: 5930 | Date:

Our collective team continues to work together to live out our company STATEMENT OF OBJECTIVES that were penned by our founders in 1987.

ID: 5786 | Date:

Tight spaces are no match for the 6011DT. Use 5-foot tooling and GH63 hammer while still being sized to slip into small spaces.

ID: 5771 | Date:

Depend on Team Geoprobe®

Since 1987, Geoprobe® has manufactured innovative drilling rigs and tooling - engineered for efficiency and safety - simplifying drillers’ jobs and empowering their companies to succeed as productive and profitable leaders in the industry. When you partner with Geoprobe® you receive:

Customer-inspired Innovation

Engineering and building industry-leading drilling rigs, tooling, and techniques for the technical driller based on your needs to work safer and more efficiently.

Exceptional Value

Ensuring drilling rigs and tooling are created in conjunction – with consistent quality – to collect the highest-quality information with the most accurate result to get you to, into, and through the job efficiently.

Superior Service

Equipping you to do your best job and keeping you in the field via one-on-one expert sales and service technicians manning live support phone lines, shipping necessary parts same-day.