There is something for just about everyone in our solid drilling augers. Use 4.5-inch drilling augers with your GH60 hammer to open a probe hole through a frost layer, asphalt, or compacted surface fills. When the layer has been penetrated, remove drilling augers and begin probing. You can even use your GH60 hammer rotation to drill an 8 in. hole for a well head protector.
Frost & Solid Drilling Augers Sizes
- 2.5 in. Frost Augers for GH60 Hammers
- 2.5 in. Frost Augers for GH40 Hammers
- 4.5 in. Frost Augers for GH60 Hammers
Parts
To order parts or to get a quote, click here.
You will have the option to order immediately (pending payment) or get a quote.
4.5 in. OD x 60 in. x 1.625 in. Hex
MN: 600200
1-5/8 in. Hex, 77/66 Series Machines
MN: 600193
.625 Diameter, 2.875 Tube
MN: 600616
4.5 in. OD x 1.625 in. Hex Bullet
MN: 600201
4.5 in. OD, 1.625 in. Hex
MN: 113916
4.5 in. OD x 60 in. x 1.625 in. Hex
MN: 600200
1-5/8 in. Hex, 77/66 Series Machines
MN: 600193
.625 Diameter, 2.875 Tube
MN: 600616
4.5 in. OD x 1.625 in. Hex Bullet
MN: 600201
4.5 in. OD, 1.625 in. Hex
MN: 113916