785-825-1842 001-785-825-1842 785-825-1842 001-785-825-1842
> Download Specs

54LT

Direct Push Machine

Soil and groundwater samples inside abandoned factory.

Soil and groundwater samples inside abandoned factory.

Geoprobe® 54LT

Geoprobe® 54LT

Side Mounted Rod Rack

Side Mounted Rod Rack

54LT Tethered Remote

54LT Tethered Remote

Rear Mounted Rod Rack

Rear Mounted Rod Rack

Rear Stabilizing Legs

Rear Stabilizing Legs

54LT Control Panel

54LT Control Panel

54LT Vice and Mount System

54LT Vice and Mount System

Limited Access work with the 54LT

Limited Access work with the 54LT

Soil and groundwater samples inside abandoned factory.
Geoprobe® 54LT
Side Mounted Rod Rack
54LT Tethered Remote
Rear Mounted Rod Rack
Rear Stabilizing Legs
54LT Control Panel
54LT Vice and Mount System
Limited Access work with the 54LT

Limited Access Machine that fits through Standard 36-in. Doorways

The Geoprobe® Model 54LT direct push machine is a rugged, compact probing unit designed for tight spaces and rough terrain. This unit is narrow enough to fit through standard 36-in. doors to get to confined, enclosed places a vehicle-mounted unit can't get to. ASTM and International Standards require that CPT tools be pushed at a rate of 2 cm/second with very little variance allowed. The Model 54LT machine features a Probe Cylinder Speed Control Valve which makes it easy to push at this consistent speed even without a steady hand. Not only will this increase the accuracy of your test while probing, it allows you to pay more attention to your real-time CPT log as you go.

❯ Contact Us

> Download Specs

54LT

Direct Push Machine


Limited Access Machine that fits through Standard 36-in. Doorways

The Geoprobe® Model 54LT direct push machine is a rugged, compact probing unit designed for tight spaces and rough terrain. This unit is narrow enough to fit through standard 36-in. doors to get to confined, enclosed places a vehicle-mounted unit can't get to. ASTM and International Standards require that CPT tools be pushed at a rate of 2 cm/second with very little variance allowed. The Model 54LT machine features a Probe Cylinder Speed Control Valve which makes it easy to push at this consistent speed even without a steady hand. Not only will this increase the accuracy of your test while probing, it allows you to pay more attention to your real-time CPT log as you go.

❯ Contact Us

.

Features & Options

Geoprobe® 54LT

Geoprobe® 54LT

    • Supplies 25,000 pounds (111kN) of pull
    • Hydraulic Lateral Swing for Offset Probe Placement
    • Two-Speed Pull Cylinder
    • Robust Geoprobe® GH42 Hammer System
    • Integrated V-Block Design for Rod Grip Use
    • Fits Through Standard 36-in. Doorways
    • Bi-directional Hammer Rotation
    • Tethered Remote System
    • Optional Low Clearance Cylinder (under 8 ft)
    • Auxiliary Hydraulic Ports for Remote Equipment
    • Rear Stabilizer Blade

Tooling & Accessories

Click on a section below to learn more about the tooling & accessories for the 54LT.

Macro-Core® MC5 Soil Sampling System

Macro-Core® MC5 Soil Sampling System

Typical tooling that can be run with the 54LT include:

  • 48-in. Direct Push Tooling
  • Probe Rod Sizes: 2.25 in., 1.5 in., 1.25 in.
  • Macro Core® MC5 Soil Sampling
  • LB Soil Sampling
  • DT22 Soil Sampling
  • SP22 Groundwater Sampling
  • SP16 Groundwater Sampling
  • 0.75-in. Prepacked Monitoring Well Installations

Video: Macro-Core® Center Rod

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.

MC5 Light Weight Center Rod Soil Sampling System The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25 in. outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25 in. OD light-weight center rods and are inserted to the bottom of the outer casing.

The Geoprobe® Screen Point 22 System

The Geoprobe® Screen Point 22 System

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.

The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-in. Lightweight Center Rods or PVC riser.

The screen head adapts to either a stainless steel or PVC screen. Designed for tough probing conditions, the fully retrievable sampler works well with the 8040DT machine or with 77 or 66 Series machines.

Tooling & Accessories


Overview

Macro-Core® MC5 Soil Sampling System

Macro-Core® MC5 Soil Sampling System

Video: DT22 Soil Sampling System Overview

Typical tooling that can be run with the 54LT include:

  • 48-in. Direct Push Tooling
  • Probe Rod Sizes: 2.25 in., 1.5 in., 1.25 in.
  • Macro Core® MC5 Soil Sampling
  • LB Soil Sampling
  • DT22 Soil Sampling
  • SP22 Groundwater Sampling
  • SP16 Groundwater Sampling
  • 0.75-in. Prepacked Monitoring Well Installations
Macro-Core® MC5

Video: Macro-Core® Center Rod

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.

MC5 Light Weight Center Rod Soil Sampling System The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”

> Learn More
DT22

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25 in. outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25 in. OD light-weight center rods and are inserted to the bottom of the outer casing.

> Learn More
SP22

The Geoprobe® Screen Point 22 System

The Geoprobe® Screen Point 22 System

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.

The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-in. Lightweight Center Rods or PVC riser.

The screen head adapts to either a stainless steel or PVC screen. Designed for tough probing conditions, the fully retrievable sampler works well with the 8040DT machine or with 77 or 66 Series machines.

> Learn More

Videos


Overview

Features & Options

Tooling & Sampling

Specifications

Click below to view standard specifications. Specifications are subject to change without notice.

54LT Specifications
Stroke54 in.1,372 mm
Weight2,500 lbs.1135 Kg
Width34.5 in.876 mm
Length (folded)87 in.2210 mm
Height (folded)64 in.1626 mm
Height (unfolded)123 in.3124 mm
Lateral Movement (side-to-side)9 in.229 mm
Foot Travel14 in.356 mm
Probe Cylinder Diameter4 in.102 mm
Down Force20,000 lbs.80 kN
Retraction Force27,000 lbs.111 kN
Hydraulic Pressure (max)2,200 psi152 bar
Hydraulic Flow Rate (system)10 gpm38 Lpm
Hammer SystemGH42GH42
Percussion Rate30 Hz30 Hz
Torque (hammer motor)620 ft. lbs.841 Nm
Rotation Rate (bi-directional)80 rpm80 rpm
Fuel Capacity (diesel)8 gal.30 L
Engine (diesel)Kubota, 3 cylinder
Engine Power22 Hp16 Kw
Cooling SystemLiquidLiquid
Outrigger Extension12 in.305 mm

Resources

Click on a section below to view information.



54LT Specs

Literature Type: E-Specs
Download File: File 54LT_Specs.pdf





54LT E-Specs

Literature Type: E-Specs
Download File: File es_2013_54lt_0.pdf



Soil and groundwater samples inside abandoned factory.

Soil and groundwater samples inside abandoned factory.

Geoprobe® 54LT

Geoprobe® 54LT

Side Mounted Rod Rack

Side Mounted Rod Rack

54LT Tethered Remote

54LT Tethered Remote

Rear Mounted Rod Rack

Rear Mounted Rod Rack

Rear Stabilizing Legs

Rear Stabilizing Legs

54LT Control Panel

54LT Control Panel

54LT Vice and Mount System

54LT Vice and Mount System

Limited Access work with the 54LT

Limited Access work with the 54LT

Geoprobe® 54LT

Geoprobe® 54LT

Geoprobe® Machines

Our machines range in size from limited access to large platform/big performance rotary sonic rigs. Many of our rigs, including the 3230DT, are also geotechnical drilling rigs. Our equipment is described as versatile, innovative, easy-to-use, and well supported. We equip the environmental, geotechnical, exploration and geothermal industries with innovative ways to work safely and efficiently, focusing on collecting high-quality information.

Rotary Sonic

❯ 8250LS
Rotary Sonic Rig

The Geoprobe® 8250LS is a full-size rotary sonic rig capable of running 20-ft. tooling. The GV5 sonic head provides 50,000 lbs. of dynamic force for increased efficiency in the field.

Geotechnical, Environmental, Exploration and Geothermal

Rotary Sonic
8150LS

❯ 8150LS
Rotary Sonic Rig

The Geoprobe® 8150LS is a full-size rotary sonic rig with high performance. It is capable of running 10 ft. tooling and the GV5 sonic head provides 50,000 lbs. of dynamic force.

Geotechnical, Environmental, Exploration and Geothermal

Direct Push & Rotary
3230DT

❯ 3230DT
Geotechnical Combo Rig

The Geoprobe® 3230DT is ideal for geotechnical and environmental applications. The high-speed drill head easily turns augers, while the automatic drop hammer is equipped for SPT work.

Geotechnical, Environmental, Exploration and CPT

Direct Push & Rotary
7822DT

❯ 7822DT
Direct Push & Rotary Rig

The Geoprobe® 7822DT is a high-capacity direct push machine with a narrow platform. Applications include soil sampling, rock coring, groundwater monitoring, geotechnical and more.

Geotechnical, Environmental, Exploration and CPT

Geotechnical
150GT

❯ 150GT
Geotechnical Rotary Rig

Specifically designed for customers focused on traditional geotechnical drilling applications utilizing: hollow stem auger, solid stem auger, SPT, mud rotary, air rotary, and high speed coring.

Geotechnical and CPT

Geotechnical
310GT

❯ 3100GT
Geotechnical Rotary Rig

The Geoprobe® 3100GT Geotechnical Rig is designed to quickly perform SPT borings (augers & mud rotary), collect shelby tube samples, take rock cores, and push CPT cone.

Geotechnical, Environmental and CPT

CPT
20 CPT Press

❯ 20CPT Press
Cone Penetration Testing

This flexible mast option with a 20-ton capacity is specifically designed for performing CPT. It’s versatile too, with a quick mount design that allows the CPT mast to be attached to multiple platforms.

Geotechnical and CPT

CPT
2060CPT

❯ 2060CPT
Cone Penetration Testing

The Geoprobe® 2060CPT is a 20 ton cabin crawler used for Cone Penetration Testing (CPT). It includes many user-friendly controls to make jobs in the field quick, efficient, and comfortable.

Geotechnical and CPT

Limited Access
Limited Access
54LT
Limited Access
Limited Access
Limited Access
© 2018 Kejr, Inc. | Privacy Policy