785-825-1842 001-785-825-1842 785-825-1842 001-785-825-1842
> Download Specs

5410

Direct Push Machine

A 5410 mounted to an open flatbed truck.

A 5410 mounted to an open flatbed truck.

The 5410 uses the carrier vehicle for power, and most field  supplies can be taken to the site within the enclosed truck.

The 5410 uses the carrier vehicle for power, and most field supplies can be taken to the site within the enclosed truck.

5410 Control Panel

5410 Control Panel

Folded for transport

Folded for transport

Storage and transport

Storage and transport

Vice on the 5410

Vice on the 5410

A 5410 mounted to an open flatbed truck.
The 5410 uses the carrier vehicle for power, and most field  supplies can be taken to the site within the enclosed truck.
5410 Control Panel
Folded for transport
Storage and transport
Vice on the 5410

Carry Everything You Need to a Job for Easy Mobilization

The 5410 features a 54-in. stroke and 25,000 lb. of pulling capacity for subsurface work. Lateral movement of the unit provides for offset placement of the probe without moving the carrier vehicle. A heavy-duty steel frame and dual extend tubes add stability to probing operations. With an optional enclosure, the 5410 and carrier vehicle can be stocked with field supplies and be ready to head to the field.

❯ Contact Us

> Download Specs

5410

Direct Push Machine


Carry Everything You Need to a Job for Easy Mobilization

The 5410 features a 54-in. stroke and 25,000 lb. of pulling capacity for subsurface work. Lateral movement of the unit provides for offset placement of the probe without moving the carrier vehicle. A heavy-duty steel frame and dual extend tubes add stability to probing operations. With an optional enclosure, the 5410 and carrier vehicle can be stocked with field supplies and be ready to head to the field.

❯ Contact Us

.

Features & Options

Geoprobe® 5410

Geoprobe® 5410

    • 54 in. (1372 mm) stroke
    • 28,900 lb. (128 kN) pulling capacity
    • Hydraulic Lateral Swing for Offset Probe Placement
    • Two-Speed Pull Cylinder
    • Robust Geoprobe® GH42 Hammer System
    • Integrated V-Block Design for Rod Grip Use
    • Reliable, Compact Truck Design
    • Bi-directional Hammer Rotation
    • Rapid Job Site Set-up and Assessment
    • Auxiliary Hydraulic Ports for Remote Equipment

Tooling & Accessories

Click on a section below to learn more about the tooling & accessories for the 5410.

Macro-Core® MC5 Soil Sampling System

Macro-Core® MC5 Soil Sampling System

Typical tooling that can be run with the 5410 include:

  • 48-in. Direct Push Tooling
  • Probe Rod Sizes: 2.25 in., 1.5 in., 1.25 in.
  • Macro Core® MC5 Soil Sampling
  • LB Soil Sampling
  • DT22 Soil Sampling
  • SP22 Groundwater Sampling
  • SP16 Groundwater Sampling
  • 0.75-in. Prepacked Monitoring Well Installations

Video: Macro-Core® Center Rod

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.

MC5 Light Weight Center Rod Soil Sampling System The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25 in. outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25 in. OD light-weight center rods and are inserted to the bottom of the outer casing.

The Geoprobe® Screen Point 22 System

The Geoprobe® Screen Point 22 System

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.

The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-in. Lightweight Center Rods or PVC riser.

The screen head adapts to either a stainless steel or PVC screen. Designed for tough probing conditions, the fully retrievable sampler works well with the 8040DT machine or with 77 or 66 Series machines.

Tooling & Accessories


Overview

Macro-Core® MC5 Soil Sampling System

Macro-Core® MC5 Soil Sampling System

Video: DT22 Soil Sampling System Overview

Typical tooling that can be run with the 5410 include:

  • 48-in. Direct Push Tooling
  • Probe Rod Sizes: 2.25 in., 1.5 in., 1.25 in.
  • Macro Core® MC5 Soil Sampling
  • LB Soil Sampling
  • DT22 Soil Sampling
  • SP22 Groundwater Sampling
  • SP16 Groundwater Sampling
  • 0.75-in. Prepacked Monitoring Well Installations
Macro-Core® MC5

Video: Macro-Core® Center Rod

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.

MC5 Light Weight Center Rod Soil Sampling System The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”

> Learn More
DT22

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25 in. outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25 in. OD light-weight center rods and are inserted to the bottom of the outer casing.

> Learn More
SP22

The Geoprobe® Screen Point 22 System

The Geoprobe® Screen Point 22 System

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.

The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-in. Lightweight Center Rods or PVC riser.

The screen head adapts to either a stainless steel or PVC screen. Designed for tough probing conditions, the fully retrievable sampler works well with the 8040DT machine or with 77 or 66 Series machines.

> Learn More

Videos


Tooling & Sampling

Specifications

Click below to view standard specifications. Specifications are subject to change without notice.

5410 Specifications
Stroke54 in.1,372 mm
Weight1,680 lb.763 Kg
Width47 in.1,194 mm
Length (folded)72 in.1,829 mm
Height (folded)43 in.1,092 mm
Lateral Movement (side-to-side)33 in.838 mm
Foot Travel39 in.991 mm
Extension20 in.508 mm
Probe Cylinder Diameter4 in.102 mm
Down Force21,700 lb.97 kN
Retraction Force28,900 lb.128 kN
Hydraulic Pressure (max)2,300 psi158 bar
Hydraulic Flow Rate (high speed)17 gpm64 L/min
Hydraulic Flow Rate (low speed)13 gpm49 L/min
Hammer SystemGH42
Percussion Rate30 Hz
Torque (hammer motor)690 ft. lb.935 Nm
Rotation Rate (bi-directional)85 rpm

Resources

Click on a section below to view information.



5410 Specs

Literature Type: E-Specs
Download File: File 5410_Specs.pdf



A 5410 mounted to an open flatbed truck.

A 5410 mounted to an open flatbed truck.

The 5410 uses the carrier vehicle for power, and most field  supplies can be taken to the site within the enclosed truck.

The 5410 uses the carrier vehicle for power, and most field supplies can be taken to the site within the enclosed truck.

5410 Control Panel

5410 Control Panel

Folded for transport

Folded for transport

Storage and transport

Storage and transport

Vice on the 5410

Vice on the 5410

Geoprobe® 5410

Geoprobe® 5410

Geoprobe® Machines

Our machines range in size from limited access to large platform/big performance rotary sonic rigs. Many of our rigs, including the 3230DT, are also geotechnical drilling rigs. Our equipment is described as versatile, innovative, easy-to-use, and well supported. We equip the environmental, geotechnical, exploration and geothermal industries with innovative ways to work safely and efficiently, focusing on collecting high-quality information.

Rotary Sonic

❯ 8250LS
Rotary Sonic Rig

The Geoprobe® 8250LS is a full-size rotary sonic rig capable of running 20-ft. tooling. The GV5 sonic head provides 50,000 lbs. of dynamic force for increased efficiency in the field.

Geotechnical, Environmental, Exploration and Geothermal

Rotary Sonic
8150LS

❯ 8150LS
Rotary Sonic Rig

The Geoprobe® 8150LS is a full-size rotary sonic rig with high performance. It is capable of running 10 ft. tooling and the GV5 sonic head provides 50,000 lbs. of dynamic force.

Geotechnical, Environmental, Exploration and Geothermal

Direct Push & Rotary
3230DT

❯ 3230DT
Geotechnical Combo Rig

The Geoprobe® 3230DT is ideal for geotechnical and environmental applications. The high-speed drill head easily turns augers, while the automatic drop hammer is equipped for SPT work.

Geotechnical, Environmental, Exploration and CPT

Direct Push & Rotary
7822DT

❯ 7822DT
Direct Push & Rotary Rig

The Geoprobe® 7822DT is a high-capacity direct push machine with a narrow platform. Applications include soil sampling, rock coring, groundwater monitoring, geotechnical and more.

Geotechnical, Environmental, Exploration and CPT

Geotechnical
150GT

❯ 150GT
Geotechnical Rotary Rig

Specifically designed for customers focused on traditional geotechnical drilling applications utilizing: hollow stem auger, solid stem auger, SPT, mud rotary, air rotary, and high speed coring.

Geotechnical and CPT

Geotechnical
310GT

❯ 3100GT
Geotechnical Rotary Rig

The Geoprobe® 3100GT Geotechnical Rig is designed to quickly perform SPT borings (augers & mud rotary), collect shelby tube samples, take rock cores, and push CPT cone.

Geotechnical, Environmental and CPT

CPT
20 CPT Press

❯ 20CPT Press
Cone Penetration Testing

This flexible mast option with a 20-ton capacity is specifically designed for performing CPT. It’s versatile too, with a quick mount design that allows the CPT mast to be attached to multiple platforms.

Geotechnical and CPT

CPT
2060CPT

❯ 2060CPT
Cone Penetration Testing

The Geoprobe® 2060CPT is a 20 ton cabin crawler used for Cone Penetration Testing (CPT). It includes many user-friendly controls to make jobs in the field quick, efficient, and comfortable.

Geotechnical and CPT

Limited Access
Limited Access
54LT
Limited Access
Limited Access
Limited Access
© 2018 Kejr, Inc. | Privacy Policy