Video Summary:
On occasion you may need to keep other signals from interfering with your wireless remote's communication. This video will show you how to re-associate your wireless remote so that the transmitter and receiver lock on to each other.
Contact Us
1835 Wall Street
Salina, Kansas 67401
Phone: (785) 825-1842
Transcript
The Geoprobe® 7822DT comes stock with a wireless remote. There are some scenarios where you may need to re-associate the wireless transmitter with the wireless receiver on the machine.
To re-associate the remote, first take the transmitter in one hand, press and hold the enable toggle, and then press and hold the on toggle simultaneously. And hold until the yellow RX light turns off.
When the light turns off, you may power up the machine. The lights will start blinking. When you let go, both the TX and RX lights should be blinking. When this happens, you have re-associated your remote.
If you’ve got a question you would like to see answered on this show, send an email to mm@geoprobe.com. And to see more maintenance minutes, go to geoprobe.com/mm.