540MT
-
No carrier vehicle to contend with but still the reliable Geoprobe® direct push power you've come to expect. The Model 540MT probe assembly is fabricated from the same components as other 5400 Series machines, and is accompanied by a PortaCo power unit. It's easily maneuvered by two people. When folded, the unit is less than 29 inches (737 mm) high. The rear wheel and handle pivot 360 degrees to deliver the tightest turning radius possible. -
540MT Specifications Standard Metric Stroke 54 in. 1372 mm Weight 990 lb. 449 Kg Width 35 in. 889 mm Length (folded) 75 in. 1905 mm Height (folded) 29 in. 737 mm Height (unfolded) 120 in. 3048 mm Probe Cylinder Diameter 4 in. 102 mm Down Force 18,000 lb. 80 kN Retraction Force 25,000 lb. 111 kN Hydraulic Pressure (system) 2,000 psi 138 bar Hydraulic Flow Rate (system) 12 gpm 38 Lpm Hammer System GH40 GH40 Percussion Rate 30 Hz 30 Hz Torque (hammer motor) 345 ft. lbs. 468 Nm Rotation Rate (hammer motor) 125 rpm (bi-directional) PortaCo Inc. Compact Hydraulic Power Unit Specifications Standard Metric Hydraulic Flow Rate 12 gpm 38 Lpm Hydraulic Pressure 2000 psi 138 bar Engine Power, electric-start 20 Hp Briggs & Stratton Engine Fuel Unleaded Gasoline (diesel available by request) Size 35 in. long x 29 in. wide x 32 in. high 889 x 737 x 813 mm Weight 320 lb. 145 Kg *Unit specifications are subject to change without notice.
-
- #54-inch (1372 mm) stroke
- Equipped with GH40 Soil Probing Hammer
- Supplies 25,000 pounds (111 kN) of pulling capacity
- Performs same operations as larger probes including concrete drilling, soil and groundwater sampling, and conductivity logging
- Weighs less than 725 pounds (329 Kg)
- Rear transport wheels and handle pivot 360 degrees to maneuver probe in extremely close quarters
- Easily attaches to remote power unit by way of hydraulic lines with quick connects
- Removable outriggers enhance stability while probing
- Powered by a PortaCo power unit
-
