Skip to main content
Frost Augers

There is something for just about everyone in our solid drilling augers. Use 4.5-inch drilling augers with your GH60 hammer to open a probe hole through a frost layer, asphalt, or compacted surface fills. When the layer has been penetrated, remove drilling augers and begin probing. You can even use your GH60 hammer rotation to drill an 8 in. hole for a well head protector.

Frost & Solid Drilling Augers Sizes

  • 2.5 in. Frost Augers for GH60 Hammers
  • 2.5 in. Frost Augers for GH40 Hammers
  • 4.5 in. Frost Augers for GH60 Hammers

Tooling Links

Parts

To order parts or to get a quote, click here.
You will have the option to order immediately (pending payment) or get a quote.

Solid Auger

4.5 in. OD x 60 in. x 1.625 in. Hex

MN: 600200

HSA Auger Connecting Pin

1-5/8 in. Hex, 77/66 Series Machines

MN: 600193

Drive Pin

.625 Diameter, 2.875 Tube

MN: 600616

Solid Auger Cutter Head

4.5 in. OD x 1.625 in. Hex Bullet

MN: 600201

Cutter Head 5T

4.5 in. OD, 1.625 in. Hex

MN: 113916

Solid Auger

4.5 in. OD x 60 in. x 1.625 in. Hex

MN: 600200

HSA Auger Connecting Pin

1-5/8 in. Hex, 77/66 Series Machines

MN: 600193

Drive Pin

.625 Diameter, 2.875 Tube

MN: 600616

Solid Auger Cutter Head

4.5 in. OD x 1.625 in. Hex Bullet

MN: 600201

Cutter Head 5T

4.5 in. OD, 1.625 in. Hex

MN: 113916