785-825-1842 001-785-825-1842 785-825-1842 001-785-825-1842
Note: The 6622CPT is a specialty production machine. Contact us at 785-825-1842 for more information or view all of our production CPT rigs.
> View Specs

6622CPT
Cone Penetration Testing

Geoprobe® 6622CPT

Geoprobe® 6622CPT

662CPT machine anchored in concrete

662CPT machine anchored in concrete

Using the 6622CPT machine in a steel mill

Using the 6622CPT machine in a steel mill

Equipped with two outboard mounted hydraulic anchor drives for installing up to 15-in. diameter anchors

Equipped with two outboard mounted hydraulic anchor drives for installing up to 15-in. diameter anchors

Geoprobe® 6622CPT

Geoprobe® 6622CPT

Geoprobe® 6622CPT
662CPT machine anchored in concrete
Using the 6622CPT machine in a steel mill
Equipped with two outboard mounted hydraulic anchor drives for installing up to 15-in. diameter anchors
Geoprobe® 6622CPT

Big CPT Push Power in a Compact Package

The compactness of the machine and its light weight make it convenient to mobilize to project sites. Larger pads on outriggers provide increased support when pulling tools in soft conditions. The newly designed, easy-to-use control panel gives the operator timely useful feedback.

> View Specs

6622CPT
Cone Penetration Testing


Big CPT Push Power in a Compact Package

The compactness of the machine and its light weight make it convenient to mobilize to project sites. Larger pads on outriggers provide increased support when pulling tools in soft conditions. The newly designed, easy-to-use control panel gives the operator timely useful feedback.

.

Features & Options

Geoprobe® 6622CPT

Geoprobe® 6622CPT

    • Self-anchoring, multi-purpose platform
    • Versatile design allows static pushing of CPT, geotechnical, and Direct Image® tools as well as use of the GH62 percussion hammer to advance Geoprobe Systems® soil and groundwater sampling systems
    • 20 Ton push capacity (dependent upon anchoring conditions)
    • 23-Ton pulling capacity
    • Manual controls for all machine functions
    • Hydraulically activated CPT chuck
    • Easily removable chuck jaws
    • Wide chuck opening to allow passage of larger probes or casings
    • Two outboard mounted hydraulic anchor drives allow for fast and easy anchoring
    • Installs anchors up to 16 inches in diameter.
    • Hydraulic side-shift moves the GH62 percussion hammer to the side for static pushing and centers the hammer for percussion driving
    • Two hydraulic outriggers allow easy machine leveling
    • Geoprobe® 20 Series rubber tracked carrier minimizes ground pressure while providing machine stability in uneven terrain
    • Auxiliary hydraulic ports located at front and rear of machine provides power for remote equipment
    • Powered by a 4 cylinder, 58 HP, liquid-cooled Kubota turbo diesel engine
    • Two-speed cylinders cycle from bottom to top in 5 seconds at high speed and 11 seconds on low speed

Videos


Direct Image®

Specifications

Click below to view standard specifications. Specifications are subject to change without notice.

Specifications
Stroke66 in.1,676 mm
Weight8,720 lb.3959 kg
Width78 in.1,981 mm
Track Width12 in.305 mm
Length (folded)135 in.3,429 mm
Height (folded)88 in.2,235mm
Height (working max)166 in.4,216 mm
Lateral Movement (side-to-side)25 in.635 mm
Extension15 in.381 mm
Main (Push) Cylinders (2) diameter4 in.102 mm
Pulling Stroke Time (high-low speed)5 sec -11 sec
Down Force40,000 lb.178 kN
Retraction Force46,000 lb.205 kN
CPT Operating Pressure2,500 psi169 bar
Track Drive Operating Pressure2,850 psi196 bar
Hydraulic Flow Rate (system)40 gpm151 Lpm
Hammer SystemGH62
Percussion Rate32 Hz
Torque (hammer motor)560 ft. lb.759 N•M
Rotation Rate (hammer motor)240 rpm (bi-directional)
Hammer Side Shift12 in.305 mm
Fuel Capacity (diesel)17 gal64 L
Engine (diesel)Kubota, 4-cylinder turbo, liquid cooled
Engine Power58 hp40 Kw
Leveling Jacks2 forward, 2 rear Hydraulic
Travel Speed0-5 mph0-8 kph
Surface Load4.4lb/in20.31 kg/cm2
Anchor Drives2
Anchor Spacing, center-to-center66 in.1676 mm
Anchor Drive Stroke69 in.1753 mm
Anchor Torque2500 ft. lb.3390 N•M
Anchor Diameter (max)15 in.381 mm
Auxiliary Hydraulics: 3 outlets (ea)30 gpm114 Lpm

Resources

Click on a section below to view information.


6622CPT Specs

6622CPT Specs

Literature Type: E-Specs
Download File: File 6622CPT_Specs_Options.pdf




Machine Service for 66 Series Track Machines (6622CPT)

Machine Service for 66 Series Track Machines (6622CPT)

Literature Type: E-Specs Product Sheets Service Documents Technical Documents
Download File: File 66_series_machines_2013_0.pdf



Geoprobe® 6622CPT

Geoprobe® 6622CPT

662CPT machine anchored in concrete

662CPT machine anchored in concrete

Using the 6622CPT machine in a steel mill

Using the 6622CPT machine in a steel mill

Equipped with two outboard mounted hydraulic anchor drives for installing up to 15-in. diameter anchors

Equipped with two outboard mounted hydraulic anchor drives for installing up to 15-in. diameter anchors

Geoprobe® 6622CPT

Geoprobe® 6622CPT

Geoprobe® 6622CPT

Geoprobe® 6622CPT

.

.

.