785-825-1842 001-785-825-1842 785-825-1842 001-785-825-1842
> Download Specs

540MT

Direct Push Machine

Geoprobe® 540MT setup in the field

Geoprobe® 540MT setup in the field

At 35 in. wide, this little machine fits through some tight spots.

At 35 in. wide, this little machine fits through some tight spots.

A 540MT is used for geotechnical surveys at a potential mining site in Greenland.

A 540MT is used for geotechnical surveys at a potential mining site in Greenland.

Transporting the 540MT

Transporting the 540MT

Hydrualic Quick connects for fast and easy set-up & tear-down of the probe

Hydrualic Quick connects for fast and easy set-up & tear-down of the probe

Compact, Hydraulic Power Unit

Compact, Hydraulic Power Unit

Geoprobe® 540MT setup in the field
At 35 in. wide, this little machine fits through some tight spots.
A 540MT is used for geotechnical surveys at a potential mining site in Greenland.
Transporting the 540MT
Hydrualic Quick connects for fast and easy set-up & tear-down of the probe
Compact, Hydraulic Power Unit

Ready for Confined Spaces and Low Ceilings with Reliable Geoprobe® Power

No carrier vehicle to contend with but still the reliable Geoprobe® direct push power you've come to expect. The Model 540MT probe assembly is fabricated from the same components as other 5400 Series machines, and is accompanied by a PortaCo power unit. It's easily maneuvered by two people. When folded, the unit is less than 29 inches (737 mm) high. The rear wheel and handle pivot 360 degrees to deliver the tightest turning radius possible.

❯ Contact Us

> Download Specs

540MT

Direct Push Machine


Ready for Confined Spaces and Low Ceilings with Reliable Geoprobe® Power

No carrier vehicle to contend with but still the reliable Geoprobe® direct push power you've come to expect. The Model 540MT probe assembly is fabricated from the same components as other 5400 Series machines, and is accompanied by a PortaCo power unit. It's easily maneuvered by two people. When folded, the unit is less than 29 inches (737 mm) high. The rear wheel and handle pivot 360 degrees to deliver the tightest turning radius possible.

❯ Contact Us

.

Features & Options

Using the 540MT inside a building to collect DT22 samples  to delineate a UST plume and determine site lithology.

Using the 540MT inside a building to collect DT22 samples to delineate a UST plume and determine site lithology.

    • 54-in. Stroke Accommodates 48-in. Tooling
    • Limited Access Direct Push Capabilities
    • Reliable Geoprobe® GH40 Hammer System
    • Bi-directional Hammer Rotation for Concrete Drilling
    • Uses Remote Hydraulic Source
    • Cart Mounted with Rear Stabilization Legs
    • Quick Connects Easily Attach to Remote Power Unit
    • Optional Telescoping Mast for Low Clearance Work

Tooling & Accessories

Click on a section below to learn more about the tooling & accessories for the 540MT.

Macro-Core® MC5 Soil Sampling System

Macro-Core® MC5 Soil Sampling System

Typical tooling that can be run with the 540MT include:

  • 48-in. Direct Push Tooling
  • Probe Rod Sizes: 2.25 in., 1.5 in., 1.25 in.
  • Macro Core® MC5 Soil Sampling
  • LB Soil Sampling
  • DT22 Soil Sampling
  • SP22 Groundwater Sampling
  • SP16 Groundwater Sampling
  • 0.75-in. Prepacked Monitoring Well Installations

Video: Macro-Core® Center Rod

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.

MC5 Light Weight Center Rod Soil Sampling System The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25 in. outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25 in. OD light-weight center rods and are inserted to the bottom of the outer casing.

The Geoprobe® Screen Point 22 System

The Geoprobe® Screen Point 22 System

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.

The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-in. Lightweight Center Rods or PVC riser.

The screen head adapts to either a stainless steel or PVC screen. Designed for tough probing conditions, the fully retrievable sampler works well with the 8040DT machine or with 77 or 66 Series machines.

Tooling & Accessories


Overview

Macro-Core® MC5 Soil Sampling System

Macro-Core® MC5 Soil Sampling System

Video: DT22 Soil Sampling System Overview

Typical tooling that can be run with the 540MT include:

  • 48-in. Direct Push Tooling
  • Probe Rod Sizes: 2.25 in., 1.5 in., 1.25 in.
  • Macro Core® MC5 Soil Sampling
  • LB Soil Sampling
  • DT22 Soil Sampling
  • SP22 Groundwater Sampling
  • SP16 Groundwater Sampling
  • 0.75-in. Prepacked Monitoring Well Installations
Macro-Core® MC5

Video: Macro-Core® Center Rod

Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability.

MC5 Light Weight Center Rod Soil Sampling System The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling system in the direct push industry ... it’s a brute!”

> Learn More
DT22

Video: DT22 Soil Sampling System Overview

The Geoprobe® DT22 Soil Sampling System is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing of Geoprobe® 2.25 in. outside diameter probe rods. Samples are collected and retrieved within a liner that is threaded onto the leading end of a string of Geoprobe® 1.25 in. OD light-weight center rods and are inserted to the bottom of the outer casing.

> Learn More
SP22

The Geoprobe® Screen Point 22 System

The Geoprobe® Screen Point 22 System

The Screen Point 22 (SP22) Groundwater Sampler from Geoprobe Systems® was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.

The SP22 can be used alone as a groundwater grab sampler or groundwater profiling tool, or with the DT22 Soil Sampling System. The screens can be deployed using either 1.25-in. Lightweight Center Rods or PVC riser.

The screen head adapts to either a stainless steel or PVC screen. Designed for tough probing conditions, the fully retrievable sampler works well with the 8040DT machine or with 77 or 66 Series machines.

> Learn More

Videos


Overview

Tooling & Sampling

Specifications

Click below to view standard specifications. Specifications are subject to change without notice.

540MT Specs
Stroke54 in.1372 mm
Weight990 lb.449 Kg
Width35 in.889 mm
Length (folded)75 in.1905 mm
Height (folded)29 in.737 mm
Height (unfolded)120 in.3048 mm
Probe Cylinder Diameter4 in.102 mm
Down Force18,000 lb.80 kN
Retraction Force25,000 lb.111 kN
Hydraulic Pressure (system)2,000 psi138 bar
Hydraulic Flow Rate (system)12 gpm38 Lpm
Hammer SystemGH40GH40
Percussion Rate30 Hz30 Hz
Torque (hammer motor)345 ft. lbs.468 Nm
Rotation Rate (hammer motor)125 rpm (bi-directional)
PortaCo Inc. Compact Hydraulic Power Unit Specifications
Hydraulic Flow Rate12 gpm38 Lpm
Hydraulic Pressure2000 psi138 bar
Engine Power, electric-start20 Hp Briggs & Stratton
Engine FuelUnleaded Gasoline (diesel available by request)
Size35 in. long x 29 in. wide x 32 in. high889 x 737 x 813 mm
Weight320 lb.145 Kg

Resources

Click on a section below to view information.



540MT Specs

Literature Type: E-Specs
Download File: File 540MT_Specs.pdf



Geoprobe® 540MT setup in the field

Geoprobe® 540MT setup in the field

At 35 in. wide, this little machine fits through some tight spots.

At 35 in. wide, this little machine fits through some tight spots.

A 540MT is used for geotechnical surveys at a potential mining site in Greenland.

A 540MT is used for geotechnical surveys at a potential mining site in Greenland.

Transporting the 540MT

Transporting the 540MT

Hydrualic Quick connects for fast and easy set-up & tear-down of the probe

Hydrualic Quick connects for fast and easy set-up & tear-down of the probe

Compact, Hydraulic Power Unit

Compact, Hydraulic Power Unit

Using the 540MT inside a building to collect DT22 samples  to delineate a UST plume and determine site lithology.

Using the 540MT inside a building to collect DT22 samples to delineate a UST plume and determine site lithology.

© 2018 Kejr, Inc. | Privacy Policy