785-825-1842 001-785-825-1842 785-825-1842 001-785-825-1842
Note: The 3200 is a specialty production machine. Contact us at 785-825-1842 for more information or view all of our machines.
> View Specs

3200
Combo Rig

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200
Geoprobe® 3200
Geoprobe® 3200
Geoprobe® 3200
Geoprobe® 3200

A True Combination Rig with Impressive Power and a Sweet Ride Home

The versatility of the 32 Series machines lies within the 4-function CB6 Combo Head ... the performance master for these rigs. There’s rotation for augering, mud and wet rotary, and rock coring work, and a patented hydraulic head clamp for safely and quickly pulling 1.25- to 6.0 in. rods while maintaining an open ID for downhole work. There’s a percussion hammer for direct push work, like driving 6-in. casing for monitoring well installation, and an automatic drop hammer that hydraulically swings out over the hole.

> View Specs

3200
Combo Rig


A True Combination Rig with Impressive Power and a Sweet Ride Home

The versatility of the 32 Series machines lies within the 4-function CB6 Combo Head ... the performance master for these rigs. There’s rotation for augering, mud and wet rotary, and rock coring work, and a patented hydraulic head clamp for safely and quickly pulling 1.25- to 6.0 in. rods while maintaining an open ID for downhole work. There’s a percussion hammer for direct push work, like driving 6-in. casing for monitoring well installation, and an automatic drop hammer that hydraulically swings out over the hole.

.

Features & Options

Geoprobe® 3200

Geoprobe® 3200

    • Patented CB7 Combo Head
    • Multi-Function Drill Mast - Air Rotary, Augering, Direct Push/Percussion, Diamond Coring, Mud Rotary, SPT, Pullback
    • Movable, Adjustable Control Panel
    • 80K Pullback
    • Head Centerline Side-Shift
    • Dual Winch with Telescoping Mast (Optional)
    • Outriggers for Added Stabilization
    • 50K Downforce
    • Drilling Control Configurations
    • Rock Coring Compatible
    • Advances 6 in. Tooling

Videos


Features & Options

Tooling & Sampling

Accessories

Maintenance

Specifications

Click below to view standard specifications. Specifications are subject to change without notice.

UNIT PLATFORM
Weight (apprx, base unit only)25,000 lb11,350 kg
Width102 in2,591 mm
Length (transport)277 in7,036 mm
Length (deployed, fully extended)330 in8,382 mm
Height (normal transport)150 in3,810 mm
Height (deployed, winch mast up)286 in7,264 mm
Extension (fore and aft)15.5 in393 mm
Lateral Movement (side-to-side)3 in76 mm
Oscillation+ 11 degrees from vertical
DRILL MAST
Head Feed Travel84 in2,134 mm
Drill Mast Travel (up and down)57 in1,448 mm
Drill Mast Outrigger Travel26 in.660 mm
Head Down Force50,000 lbf222 kN
Head Retraction Force80,000 lbf356 kN
Head Feed Down (rate)60 ft/min18 m/min
Head Feed Up (rate, regen)93 ft/min38 m/min
Head Feed Up (rate, non-regen)46 ft/min14 m/min
ENGINE
HP Limited Pump, max pressure4,000 psi275.8 bar
HP Limited Pump, max flow72 gpm273 L/min
Fuel Capacity (diesel)80 gal303 L
AUTOMATIC DROP HAMMER, DH-105
Drop Height, standard30 in.762 mm
Float31 in.787 mm
Slug Weight, standard140 lb64 kg
Slug Weight, optional100 - 340 lb45 - 154 kg
COMBO DRILL HEAD
CB6.2 Rotary Drive, 4-Speed
Torque, max6,000 ft-lb8,135 N•M
Rotation Speed0-800 rpm
Thru Spindle ID2.8 in71 mm
CB6 Rotary Drive, 2-Speed
Torque, max6,000 ft-lb8,135 N•M
Rotation Speed0-150 rpm
Thru Spindle IDN/A
Head Sideshift26 in.660 mm
Head Feed Pressure Control, wobOptional
Hydraulic Head Clampyes
Direct Push Hammer Options
GH70 Direct Push Hammer
GH6400 Direct Push Hammer
9-in. PULLBACK / BREAKOUT
Clamp Opening8 in203 mm
Clamp Range2.25 - 8 in31.75 - 203 mm
Clamp Force0 - 21,200 lbf0 - 94 kN
Breakout Torque13,900 ft-lbf18,846 N•m
Pullback50,000 lbf222 kN
Weight1,200 lb545 kg
7-in. SINGLE CLAMP BREAKOUT
Clamp Opening7 in178 mm
Clamp Range1.25 - 6 in31.75 - 152 mm
Clamp Force0 - 17,500 lbf0 - 78 kN
Breakout Torque6,000 ft-lbf8,135 N•m
Weight350 lb159 kg
Hydraulic Winch (as commonly sold - other winch options available)
Winch Option 1 (220614)
Line Pull1,100 lbf4.9/ kN
Line Speed230 fpm70 m/min
Drum Capacity250 ft76 m
Cable Size3/16 in.4.8 mm
Winch Option 2 (224247)
Line Pull8,510 lbf38 kN
Line Speed115 fpm35 m/min
Drum Capacity250 ft76 m
Cable Size1/2 in.12.7 mm

Resources

Click on a section below to view information.


32 Series Rig Inspection Sheet (3230DT, 3200)

3200 Specs

3200 Specs

Literature Type: E-Specs
Download File: File 3200_Spec_Options.pdf



Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

Geoprobe® 3200

.

.

.