Skip to main content
4x6 Sonic Sampling

The 4x6 drilling with casing method is a well-established configuration that uses a 4 in. core barrel overcased with a 6 in. casing. Other sonic configurations follow in this manner with larger inner and outer casing sizes. When telescoping one casing over another, (such as 4x6) it is important to consider the spacing (annulus) between the telescoping casings. Geoprobe® sonic casing is designed so that each incremental casing is sized with bit clearances and annular space in mind.

Conventional Drilling with Casing Sonic Sampling

Geoprobe Systems® conventional sonic sampling systems provide a wide range of drilling with casing sizes and bit configurations. Conventional sonic sampling consists of driving your lead core barrel (sample collection) first and then overcasing it with a larger size casing. Once the larger casing has reached the same depth of the core barrel, the core barrel is removed, sample extruded, core barrel sent back down the middle of the larger casing and advanced out the end collecting another sample. Again, the larger casing is advanced to the same depth as the core barrel. This process is repeated to the depth desired. A long established casing configuration for this is using a 4 in. core barrel overcased with a 6 in. casing (4 x 6 Sonic Sampling). Other sonic configurations follow in this manner with larger inner and outer casing sizes.

Geoprobe® Drilling with Casing Advantages

Geoprobe® sonic casings have been uniquely designed with conventional sonic sampling in mind. When telescoping one casing over another, (such as 4x6) it is important to consider the spacing (annulus) between the telescoping casings. Geoprobe® sonic casing is designed so that each incremental casing is sized with bit clearances, and annular space in mind. If there is too little annulus between casings, certain soils can cause them to lock up and become stuck together. If there is too much annular space between casings, then excessive water is needed to flush the soil between the casings. The Geoprobe® sonic casing family has been uniquely designed so that each incremental casing size works efficiently with the next. Notice the similarities in the annular space between the casing sizes in the diagram. This results in a very efficient combination of casings for use in conventional sonic sampling applications such as 4x6, 6x8, or 8x10.

Key Features

  • Well-established drilling with casing configuration that uses a 4 in. core barrel overcased with a 6 in. casing.
  • Geoprobe® sonic casing is designed so that each incremental casing is sized with bit clearances and annular space in mind.

Tooling Links

Parts

To order parts or to get a quote, click here.
You will have the option to order immediately (pending payment) or get a quote.

6.0 in. Sonic Casing RHSL

120 in.

MN: 210979

6.0 in. Sonic Casing RHSL

60 in.

MN: 210648

6.0 in. Sonic Casing RHSL

24 in.

MN: 211174

6.0 in. Sonic Casing RHSL

18 in.

MN: 211277

6.0 in. Sonic Casing RHSL

12 in.

MN: 212350

6.0 in. Sonic Casing RHSL

6 in.

MN: 212351

6.0 in. Sonic Bit RHSL, Dome

6.38 in. OD, 5.02 in. ID

MN: 210749

6.0 in. Sonic Bit RHSL, Para

6.45 in. OD, 5.02 in. ID

MN: 213325

6.0 in. Sonic Bit RHSL, Dome Hardfaced

6.38 in. OD; 5.02 in. ID

MN: 237966

6.0 in. Sonic Bit RHSL, Para Hardfaced

6.45 in. OD; 5.02 in. ID

MN: 237967

4.5 in. Sonic Casing LHSL

120 in.

MN: 210172

4.5 in. Sonic Casing LHSL

60 in.

MN: 210495

4.5 in. Sonic Casing LHSL

24 in.

MN: 210563

4.5 in. Sonic Casing LHSL

12 in.

MN: 210602

4.5 in. Sonic Core Catcher

LH, Short

MN: 231171

4.5 in. Sonic Core Catcher

LH, Thin

MN: 213151

4.5 in. Sonic Bit LHSL, Dome

4.88 in. OD, 3.53 in. ID

MN: 210569

4.5 in. Sonic Bit LHSL, Para

4.95 in. OD, 3.52 in. ID

MN: 215168

4.5 in. Sonic Bit LHSL, Dome Hardfaced

4.88 in. OD; 3.53 in. ID

MN: 237956

4.5 in. Sonic Bit LHSL, Para Hardfaced

4.95 in. OD; 3.52 in. ID

MN: 237957

4.5 in. Sonic Bit LHSL Undercut, Para

4.90 in. OD, 3.32 in. ID

MN: 212514

4.5 in. Sonic Bit LHSL Undercut, Para Hardfaced

4.90 in. OD; 3.32 in. ID

MN: 237961

4.5 in. Sonic Bit LHSL Undercut ID Carbide, Para

4.90 in. OD, 3.15 in. ID

MN: 213481

4.5 in. Sonic Bit LHSL, Para

4.75 in. OD, 3.75 in. ID

MN: 221895

4.5 in. Sonic Bit LHSL CC

4.50 in. OD, 3.75 in. ID

MN: 226269

4.5 in. Sonic Bit LHSL Flapper Single

4.75 in. OD, 3.75 in. ID

MN: 226328

4.5 LHSL Box x 4.5 LHSL Pin

4.00 in. S-S, Sub saver

MN: 212679

Rod Wiper Donut

6.0 in. (Weldment: 204387)

MN: 600624

Rod Wiper Donut

4.5 in. (Weldment: 204387)

MN: 600448

Core Bags (SDT45, WWL45, 4X6)

8 in. flat x 725 ft.

MN: 106477

Thread Compound

1 Gallon

MN: 600729

6.0 in. Sonic Casing RHSL

120 in.

MN: 210979

6.0 in. Sonic Casing RHSL

60 in.

MN: 210648

6.0 in. Sonic Casing RHSL

24 in.

MN: 211174

6.0 in. Sonic Casing RHSL

18 in.

MN: 211277

6.0 in. Sonic Casing RHSL

12 in.

MN: 212350

6.0 in. Sonic Casing RHSL

6 in.

MN: 212351

6.0 in. Sonic Bit RHSL, Dome

6.38 in. OD, 5.02 in. ID

MN: 210749

6.0 in. Sonic Bit RHSL, Para

6.45 in. OD, 5.02 in. ID

MN: 213325

6.0 in. Sonic Bit RHSL, Dome Hardfaced

6.38 in. OD; 5.02 in. ID

MN: 237966

6.0 in. Sonic Bit RHSL, Para Hardfaced

6.45 in. OD; 5.02 in. ID

MN: 237967

4.5 in. Sonic Casing LHSL

120 in.

MN: 210172

4.5 in. Sonic Casing LHSL

60 in.

MN: 210495

4.5 in. Sonic Casing LHSL

24 in.

MN: 210563

4.5 in. Sonic Casing LHSL

12 in.

MN: 210602

4.5 in. Sonic Core Catcher

LH, Short

MN: 231171

4.5 in. Sonic Core Catcher

LH, Thin

MN: 213151

4.5 in. Sonic Bit LHSL, Dome

4.88 in. OD, 3.53 in. ID

MN: 210569

4.5 in. Sonic Bit LHSL, Para

4.95 in. OD, 3.52 in. ID

MN: 215168

4.5 in. Sonic Bit LHSL, Dome Hardfaced

4.88 in. OD; 3.53 in. ID

MN: 237956

4.5 in. Sonic Bit LHSL, Para Hardfaced

4.95 in. OD; 3.52 in. ID

MN: 237957

4.5 in. Sonic Bit LHSL Undercut, Para

4.90 in. OD, 3.32 in. ID

MN: 212514

4.5 in. Sonic Bit LHSL Undercut, Para Hardfaced

4.90 in. OD; 3.32 in. ID

MN: 237961

4.5 in. Sonic Bit LHSL Undercut ID Carbide, Para

4.90 in. OD, 3.15 in. ID

MN: 213481

4.5 in. Sonic Bit LHSL, Para

4.75 in. OD, 3.75 in. ID

MN: 221895

4.5 in. Sonic Bit LHSL CC

4.50 in. OD, 3.75 in. ID

MN: 226269

4.5 in. Sonic Bit LHSL Flapper Single

4.75 in. OD, 3.75 in. ID

MN: 226328

4.5 LHSL Box x 4.5 LHSL Pin

4.00 in. S-S, Sub saver

MN: 212679

Rod Wiper Donut

6.0 in. (Weldment: 204387)

MN: 600624

Rod Wiper Donut

4.5 in. (Weldment: 204387)

MN: 600448

Core Bags (SDT45, WWL45, 4X6)

8 in. flat x 725 ft.

MN: 106477

Thread Compound

1 Gallon

MN: 600729